Sony DSR-400K/400PK Operating Instructions Manual page 87

Page Item
AUDIO AU MODE
AU HEADROOM
AU FADE
AU SG (1KHz)
F AUDIO VOL
VTR MODE REC TALLY BLINK
STBY OFF TIMER
REC FORMAT
SETUP ADD
PRESET COLOR TEMP <P>
WHT
COLOR FINE <P>
R GAIN <P>
B GAIN <P>
D5600K <P>
AWB ENABLE <P>
DCC ADJUST DCC FUNCTION
SEL
DCC D RANGE
DCC POINT
DCC GAIN
DCC DELAY TIME
Settings Default USER
menu
FS32K/FS48K FS48K Page4 Sets the audio recording level.
NTSC: –12dB/ NTSC: –
–20dB –20dB
PAL: –12dB/ PAL:
–18dB –18dB
OFF/ON OFF
OFF/ON OFF
ENABL/DSABL ENABL
OFF/ON ON –
1MIN/3MIN/ 1MIN
5MIN
DVCAM/DV SP DVCAM Page4 Selects the type of video codec.
OFF/ON ON –
Displays color 3200 Page1 Sets the color temperature of preset
temperature
(Converted
form R/B
GAIN).
(–99 to 99) 0 –
OFF/ON OFF
DCC/ADP.K/ DCC –
FIX
400% / 450% / 600%
500% / 550% /
600%
(–99 to 99) 0
Description
Sets the audio reference level.
Turns the audio fade-in and fade-out
functions on or off. (When set to ON,
recording is continued during an
audio fade-out.)
Sets whether to output a 1 kHz test
tone during the Color Bar mode or
not.
Sets the validity of the AUDIO LEVEL
knob on the front of the camcorder
(page 11). (When setting to ENABL,
the level of CH-1 is set to the value of
AUDIO LEVEL knob on the front of
the camcorder multiplied by the
AUDIO LEVEL (CH-1/CH-2) control
on the side of the camcorder.)
Turns the tally illumination control on
or off in the event of BATTERY
BEFORE END/TAPE BEFORE END.
Sets the time of standby-off interval (if
there is no operation for a preset
interval time while the recording is
stopped, the camcorder goes to
standby-off mode automatically).
See "To use setup add (DSR-400/
450WS only)" on page 66.
white balance.
Adjusts the value more precisely
when the color temperature
adjustment through COLOR TEMP
<P> is not satisfactory.
Sets R gain of preset white balance.
Sets B gain of preset white balance.
Selects whether to electrically apply
5600K filter to preset white balance.
Turns on and off the function which
automatically acquires the preset
white balance.
Selects the function assigned to the
DCC switch. ADP.K stands for
Adaptive Knee and FIX stands for
fixed value.
Sets the dynamic range when the
DCC switch is set to the ON position.
Adjusts DCC minimum knee point.
Adjusts gain to DCC detected value.
Adjusts DCC reaction speed.
Menu Organization and Operation
File
A P
A P
A P R St
A St
–
A P Sc
A P
87