Siemens SINUMERIK 840D sl Operation/Programming Manual page 181

08/2005
5
End face/end face C and end face Y - Polar:
Z0 Z coordinate of the reference point (abs.)
CP Positioning angle for machining area (only for end face Y)
C0 C coordinate for first position (abs.)
L0 1st position of hole with reference to Y axis (abs.)
C1 ...C7 C coordinate for further positions (abs. or inc.)
Incremental dimensions: The plus/minus sign is evaluated.
L1 ...L7 Distance to position (abs. or inc.)
Incremental dimensions: The plus/minus sign is evaluated.
Peripheral surface/peripheral surface C - Cartesian:
Cylinder diameter ¬ (abs.)
X0
Y0
Y coordinate for first position (abs.)
Z0
Z coordinate for first position (abs.)
Y1 ...Y7
Y coordinate for further positions (abs. or inc.)
Incremental dimensions: The plus/minus sign is evaluated.
Z1 ... Z7
Z coordinate for further positions (abs. or inc.)
Incremental dimensions: The plus/minus sign is evaluated.
Peripheral surface/peripheral surface C - Cylindrical:
C0 C coordinate for first position (abs.)
Z0 1st position of hole with reference to Z axis (abs.)
C1 ...C7 C coordinate for further positions (abs. or inc.)
Incremental dimensions: The plus/minus sign is evaluated.
Z1 ... Z7 Further positions in the Z axis (abs. or inc.)
Incremental dimensions: The plus/minus sign is evaluated.
Peripheral surface Y:
X0 Reference point in X direction (abs.)
C0 Reference point
Y0 Y coordinate for first position (abs.)
Z0 Z coordinate for first position (abs.)
Y1 ...Y7 Y coordinate for further positions (abs. or inc.)
Incremental dimensions: The plus/minus sign is evaluated.
Z1 ... Z7 Z coordinate for further positions (abs. or inc.)
Incremental dimensions: The plus/minus sign is evaluated.
♥ Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition
ShopTurn Functions
5
5.2 Drilling
mm
Degrees
Degrees
mm
Degrees
mm
mm
mm
mm
mm
mm
Degrees
mm
Degrees
mm
mm
Degrees
mm
mm
mm
mm
5-181