Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Audio Technica AT-LP60X
Summary of Contents for Audio Technica AT-LP60X
- Page 1 AT-LP60X User Manual Automatic Belt-Drive Turntable...
-
Page 2: Package Contents
Package contents Make sure that you have all the included items listed below before using this product. If some items are missing or damaged, contact your local Audio-Technica dealer. Turntable body Felt mat Platter (with drive belt) •... -
Page 3: Safety Precautions
Safety precautions Safety precautions Although this product was designed to be used safely, failing For customers in the Canada to use it correctly may result in an accident. To ensure safety, observe all warnings and cautions while using the product. IC statement: CAN ICES-3 (B)/NMB-3(B) Important information... -
Page 4: Part Names And Functions
Part names and functions 45 RPM adapter (shown in receptacle) Platter speed button Adapts 7" records with large center holes to fit center Select the platter speed (33-1/3 or 45 RPM). spindle. START button Platter Spins the platter and moves the tonearm. Spindle STOP button Returns the tonearm to its original position and stops the... -
Page 5: Preparation For Use
Preparation for use 2. Place the belt on the motor pulley (brass-colored). Installing the turntable Align one of the platter openings with the brass motor • pulley, and, while pulling both ends of the red ribbon that Mount the product on a level surface. •... - Page 6 Preparation for use Rotating the platter Connecting the device 1. Using your hands, rotate the platter ten times. Align the settings for the pre-amplifier selector switch and connect the RCA audio cable to an input jack that is compatible Remove the tie that locks the tonearm and press the •...
-
Page 7: Playing A Record
Playing a record Before playing a record Manual operation 1. Remove the cartridge’s protector. Lower the volume of the amplifier, speakers, etc. sufficiently. Pull the protector straight forward to remove it. • 1. Press the tonearm lift button. Applying a downward force may cause the stylus to come •... - Page 8 Playing a record Care Pausing the record Turntable body 1. After lowering the volume of the amplifier, speakers, When the turntable body is dirty or dusty, first disconnect the • etc. sufficiently, press the tonearm lift button to lift the AC adapter, and then wipe off the dirt and dust with a soft, dry cloth.
-
Page 9: Replacing The Stylus
Replacing the stylus Replacing the belt The belt is a consumable part. Replace the belt if the speed of • Removing the stylus playback slows down or irregular rotation occurs. As a rule of thumb, we suggest replacing the belt once a year. In addition to the deterioration of sound quality, records may •... -
Page 10: When The Turntable Is Moved
Replacing the belt When the turntable is moved 5. Place the belt on the motor pulley (brass-colored). Using the product's original packing materials, wrap the turntable in the reverse order from when you unwrapped it. If Grasp the belt that was attached in step 3 and, while •... -
Page 11: Troubleshooting
Troubleshooting Problem Solution The platter does not spin. Is the AC adapter connected to the outlet? Connect the AC adapter to the outlet. • Has the belt slipped from the platter? Correctly place the belt on the platter. • Is the belt placed on the motor pulley? Check that the belt is placed on the motor pulley •... -
Page 12: Specifications
(approx. 1.2 m (3.9')), AC adapter (approx. 1.5 m (4.9')) Replacement stylus (sold ATN3600L separately) Replacement belt (sold AT-LP60X exclusive belt separately) Specifications are subject to change without notice due to improvements. Audio-Technica Corporation 2-46-1 Nishi-naruse, Machida, Tokyo 194-8666, Japan www.audio-technica.com...
Need help?
Do you have a question about the AT-LP60X and is the answer not in the manual?
Questions and answers