Sony Handycam DCR-TRV11E Operating Instructions Manual page 181

Troubleshooting
Symptom
The melody or beep sounds for 5
seconds.
While charging the battery pack, no
indicator appears or the indicator
flashes in the display window.
No function works though the
power is on.
When you set the POWER switch to
VCR or OFF (CHG), if you move
your camcorder, you may hear a
clatter sound from inside your
camcorder.
Cause and/or Corrective Actions
• Moisture condensation has occurred.
c Remove the cassette and leave your camcorder for at least 1
hour to acclimatize. (p. 195)
• Some troubles has occurred in your camcorder.
c Remove the cassette and insert it again, then operate your
camcorder.
• The AC power adaptor is disconnected.
c Connect it firmly. (p. 19)
• The battery pack is not properly installed.
c Install it properly.
• Something is wrong with the battery pack.
c Contact your Sony dealer or local authorized Sony service
facility.
• Disconnect the mains lead of the AC power adaptor or remove
the battery, then reconnect it in about one minute. Turn the
power on. If the functions still do not work, open the LCD
panel and press the RESET button beside the SELFTIMER
button using a sharp-pointed object. (If you press the RESET
button, all the settings including the date and time return to the
default.) (p. 207)
• Your camcorder is not a malfunction.
181