Changing The Login Credentials For The Transfer Station Configuration Page; Disabling The Configuration Page - Watchguard VISTA WiFi User Manual

Appendix D: VISTA Transfer Station Setup

Changing the login credentials for the Transfer Station configuration page

The first time you log in to the Transfer Station configuration page, use the default user name,
Admin, and password, V1$T@xfr.
Note: WatchGuard recommends that you change the user name and password
from the default values the first time you log in to the Transfer Station
configuration page.
To change the Username and Password:
Enter the new credentials in the fields, then click Save Changes.
n
The system logs you out of the Transfer Station configuration page and asks you to log back in
using the new credentials.

Disabling the configuration page

The Disable feature can function as another level of security. Disabling the configuration page
(web server) after you have finished configuring the Transfer Station prevents others from
accessing the configuration page to make unauthorized changes.
When you disable the configuration page, however, you also prevent authorized administrators
from making changes as needed.
Warning! Disabling the configuration page prevents anyone, including
authorized administrators, from making changes to the VISTA Transfer Station
configuration.
To disable the current VISTA Transfer Station's configuration page (web server):
Click Disable.
n
Once you disable the configuration page for the current Transfer Station, you cannot change
any configuration settings or configure the current Transfer Station at all UNLESS you reset the
Transfer Station to factory default. If you reset a Transfer Station back to factory default, all
current settings are lost and you must start the configuration process again from the
beginning.
124
VISTA Body Camera
WGD00120 Revision
ReviewDraft_111518