Using The Viewfinder - Sony Handycam DCR-PC101 Operating Instructions Manual

Using the viewfinder

Pull out the viewfinder until it clicks, and then turn the LCD panel over and move it
back to your camcorder body with the LCD screen facing out. You can operate with the
touch panel using the viewfinder.
Use the viewfinder in the following case:
When operating camera brightness and the fader (only in CAMERA) on the touch panel
using the viewfinder.
(1) Set the POWER switch to CAMERA or MEMORY. Pull out the viewfinder
(2) Press
(3) Press OK. The LCD screen is turned off.
(4) Using the viewfinder, press the LCD screen. EXPOSURE,
(5) Select a desired item, then press
EXPOSURE: adjust the exposure by pressing –/+.
FADER:
To make the buttons on the LCD screen disappear
Press
70
until it clicks, and then turn the LCD panel over and move it back to your
camcorder body with the LCD screen facing out.
OFF. The message PANEL OFF appears on the screen.
FADER (only in CAMERA) appear.
press FADER until the desired fader mode is displayed.
The indicator changes as follows:
FADER t M. FADER t BOUNCE t MONOTONE
(no indicator) T
ON: The LCD screen lights up, then becomes Mirror Mode.
4
In CAMERA
EXPO–
SURE
ON
In MEMORY
EXPO–
SURE
ON
OK.
OK.
DOT T
OK
FADER
OK
OK,
WIPE T OVERLAP
Viewfinder
ON and