Advertisement
Please read these instructions and retain them for future use.
TECHNICAL SPECIFICATIONS
Measuring Range:
Graduation:
Accuracy:
Material:
CALIPER FEATURES
1. Beam
2. Internal jaws
3. Gear rack
4. Dial
5. Lock screw
USE INSTRUCTIONS
SETUP:
1. Wipe the blades clean with a cloth.
2. Close the blades and hold with light pressure.
3. The dial indicator should be on 0.
4. If the dial indicator is not on 0, loosen the bezel lock screw.
Rotate the bezel so that the dial indicator is pointing to 0.
5. Tighten the bezel lock screw.
DIAL CALIPER
Instruction Manual
FOR YOUR SAFETY AND PROPER CARE OF THIS TOOL
0-6 in
0.001 in
± 0.001 in
Stainless Steel
6. External jaws
7. Depth measuring blade
8. Bezel lock screw
9. Slider
Advertisement
Table of Contents
Related Manuals for National Metallic DIAL CALIPER
Summary of Contents for National Metallic DIAL CALIPER
- Page 1 DIAL CALIPER Instruction Manual FOR YOUR SAFETY AND PROPER CARE OF THIS TOOL Please read these instructions and retain them for future use. TECHNICAL SPECIFICATIONS Measuring Range: 0-6 in Graduation: 0.001 in Accuracy: ± 0.001 in Material: Stainless Steel CALIPER FEATURES 1.
-
Page 2: Maintenance Instructions
Differential Measurements MEASURING METHODS: A1 — Inside Dimension Measurements A3 — Outside Dimension Measurements A2 — Step Measurements A4 — Depth Measurements READING INSTRUCTIONS For quick reading, combine the numbers of the beam scale and the dial in order: I. Read the integral values on the main scale of the beam (noted in tenths of an inch).
Need help?
Do you have a question about the DIAL CALIPER and is the answer not in the manual?
Questions and answers