Liko Sabina II EE Instruction Manual

Liko Sabina II EE Instruction Manual

Sit-to-stand lift
Hide thumbs Also See for Sabina II EE:

Advertisement

Sabina™ II
Sit-to-stand lift
Instruction Guide
Sabina II EE
Prod. No. 2020003
SlingBar 350
Comfort SlingBar
The Sabina sit-to-stand lift is especially designed for people
who have difficulty in standing up on their own from a
seated position.
Sabina sit-to-stand lift is intended for use with patients
who are able to actively participate in the raising motion.
When standing, they can be moved to a wheelchair or to a
toilet; this gives them standing practice in connection with
the transfer.
There are two different sling bar options for Sabina sit-to-
stand lift, as well as many different sit-to-stand vests.
The patient's overall mobility determines the choice of
sling bar and sit-to-stand vest.
In this document, the person being lifted is referred to as the patient, and the person helping is referred to as the caregiver.
is a warning triangle used for situations which require extra care and attention.
IMPORTANT!
Read the instruction guide for both the patient lift and lifting accessories before use. Lifting and transferring a person always involves
a certain level of risk. It is important to completely understand the contents of the instruction guide. The equipment should be used
by trained personnel only. Please contact Hill-Rom in the event of any uncertainties or questions.
7EN155106 Rev. 1
ENGLISH
Product Description
The Sabina sit-to-stand lift equipped with the Comfort
SlingBar combined with the Liko ComfortVest provides an
especially gentle lifting action without putting pressure
under the arms. This combination is suitable for those who
are especially sensitive to pressure under the arms, such as
people who are paralyzed on one side.
Sabina sit-to-stand lift can also, to a limited extent, be used
for passive lifting of a patient sitting in a sling.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Sabina II EE and is the answer not in the manual?

Questions and answers

Summary of Contents for Liko Sabina II EE

  • Page 1 The Sabina sit-to-stand lift is especially designed for people The Sabina sit-to-stand lift equipped with the Comfort who have difficulty in standing up on their own from a SlingBar combined with the Liko ComfortVest provides an seated position. especially gentle lifting action without putting pressure under the arms.
  • Page 2: Table Of Contents

    This instruction guide contains important information for users of the product. All those who use the product should review and completely understand the contents of the instruction guide. Remember to keep the instruction guide in a place where it is always available to those using the product. www.hill-rom.com I www.liko.com Sabina™ II sit-to-stand lift • 7EN155106 Rev 1...
  • Page 3: Safety Instructions

    Sabina II EE sit-to-stand lift have been tested by accredited testing institutes, and comply with the requirements for MDD Class 1 products (MDD 93/42/EEC). Sabina II EE sit-to-stand lift comply with the requirements of EN ISO 10535:2006, and applicable parts of IEC 60601-1, IEC 60601-1-2, ANSI/AAMI ES60601-1 and CAN/CSA C22.2 no 60601-1.
  • Page 4: Definitions

    Comfort SlingBar: 785 mm (30.9 inch.) Class II equipment. Lifting Speed SlingBar 350: 54 mm/s (2.13 inch./s) (without load): Comfort SlingBar: 47 mm/s (2.1 inch./s) Maximum noise output: 46 dB(A) Protection class: IP X4 www.hill-rom.com I www.liko.com Sabina™ II sit-to-stand lift • 7EN155106 Rev 1...
  • Page 5: Measurement

    Different measurements depending on the height-setting position, please see ”Assembly”, page 6. Note! The measurements are based on the lift being equipped with standard wheels. When changing wheels, check that the lift still achieves desired lifting height. Reference measurement according to Standard EN ISO 10535:2006. www.hill-rom.com I www.liko.com Sabina™ II sit-to-stand lift • 7EN155106 Rev 1...
  • Page 6: Assembly

    Hook it on the front edge of the battery C) Plug the charger cable into the connector cable. and push down on the back until you hear a clicking sound. www.hill-rom.com I www.liko.com Sabina™ II sit-to-stand lift • 7EN155106 Rev 1...
  • Page 7: Assembly

    • the wheel brakes are working • the emergency lowering device works (mechanically and • the indicator lamps on the front of the control box electrically) illuminate during charging. www.hill-rom.com I www.liko.com Sabina™ II sit-to-stand lift • 7EN155106 Rev 1...
  • Page 8: Operation

    During passive/active lifting, the wheels should be unlocked so that the lift can be moved to the patient’s centre of gravity. www.hill-rom.com I www.liko.com Sabina™ II sit-to-stand lift • 7EN155106 Rev 1...
  • Page 9: Charging The Batteries

    NOTE! The lift cannot be used when the charger cable is plugged into a socket. Sabina II EE sit-to-stand lift comply with the Directive 2002/96/EC on waste electrical and electronic equipment. Old batteries are to be deposited at the nearest recycling facility in accordance with local regulations or given to personnel authorized by Hill-Rom.
  • Page 10: Maximum Load

    Sabina II. Study also the instruction guide for respective sit-to- stand vest/sling or lifting accessory for further guidance. Contact your Hill-Rom representative for advice and information on Liko’s product range. Holder for Quick Reference Guide Prod. No. 2000100 Quick Reference Guide Sabina II...
  • Page 11 Battery charger, wall-mounted Prod. No. 2004106 or for use with a table charger housing Extra battery Prod. No. 2006106 Table charger housing Prod. No. 2107103 excl. charger and battery www.hill-rom.com I www.liko.com Sabina™ II sit-to-stand lift • 7EN155106 Rev 1...
  • Page 12: Using Sabina Sit-To-Stand Lift To Assist Users Into A Standing Position

    Raising a person with active lifting using Sabina sit-to-stand lift with SlingBar 350 For this sling bar, we recommend Liko SupportVest mod. 91 or Liko SafetyVest mod. 93, 94. When using SlingBar 350, the patient has the arms outside the sling. SlingBar 350 in combination with SafetyVest mod. 93, 94 gives the patient extra support in the standing-up situation.
  • Page 13 The ComfortVest is designed to lift behind the back and on the outside of the arms. The Comfort SlingBar can also, to a limited extent, be used with Liko SafetyVest mod.
  • Page 14: Using Sabina Sit-To-Stand Lift In Passive Lifting Situations

    Liko Straps. Sabina sit-to-stand lift with Comfort SlingBar (bar width 600 mm) For this sling bar, we recommend Liko UniversalSling mod. 000 and 002, as well as Liko OriginalSling mod. 10 and 11. See the respective instruction guide for the sling model for more information or contact Hill-Rom for further guidance.
  • Page 15 Sabina sit-to-stand lift. If the need for passive lifting persists, we recommend that you switch to one of the lifts mentioned above. www.hill-rom.com I www.liko.com Sabina™...
  • Page 16: Simple Troubleshooting

    4. Check the battery voltage. 5. If the problem remains, please contact Hill-Rom. Contact Hill-Rom. If you hear unusual sounds. Recycling Instructions Lead battery (Pb) Waste of Electrical and Electronic Equipment (WEEE). Metals www.hill-rom.com I www.liko.com Sabina™ II sit-to-stand lift • 7EN155106 Rev 1...
  • Page 17: Cleaning And Disinfection

    Cleaning and Disinfection Safety Recommendations Cleaning and disinfecting procedures for Liko™ Mobile lifts. This instructions do not replace the facility’s own cleaning and disinfection policies. • Wear protective equipment according to manufacturer’s instruction and per facility protocol throughout the cleaning operations, such as: rubber gloves, goggles, apron, face mask and shoe covers.
  • Page 18 Disinfection Instructions 1. For the use of suitable disinfectants see ”Application of commonly used Cleaning / Disifectants on Liko products” in this document. 2. Use the choice of disinfectant according to the manufacturer’s instructions and repeat the work step as in”Cleaning Instructions"...
  • Page 19 I www.liko.com Sabina™ II sit-to-stand lift • 7EN155106 Rev 1...
  • Page 20: Inspection And Maintenance

    Hill-Rom and using original Liko spare parts. Service Agreement Hill-Rom offers the opportunity to enter into service contracts for the maintenance and regular inspection of your Liko product. Expected Life Time The product has an expected life time of 10 years when correctly handled, serviced and periodically inspected in accordance with Liko’s instructions.

Table of Contents