Fitting The Cup Holder - Mamas & Papas Pliko combination Manual

FITTING THE CUP HOLDER

The drinks holder can be
attached to either the left or
right hand side of the
pushchair.
To fit the cup holder, slide the
cup holder down onto the
attachment point on the
handle as shown in the
diagram.
Continue to push the cup
holder down onto the
attachment point until it
'clicks' into position.
Never place items weighing
more than 0.5 Kg (1lbs) in
the cup holder.
It is dangerous to place hot drinks in the cup holder. Never hang
additional items on the cup holder.
Click
– 8 –
FITTING THE BUMPER BAR
Remove the caps in the ends
of the armrests by pushing
the button on the underside
of the armrest upwards.
With the button still pushed
in, slide the cap out of the
armrest.
Repeat the process for the
other armrest.
Insert the two ends of the
bumper bar into the holes in
the ends of the armrests.
Push the bumper bar in until
they click into position.
– 9 –