emitor SATLOOK Mark III DiSEqC Manual
  1. Manuals
  2. Brands
  3. emitor Manuals
  4. Measuring Instruments
  5. SATLOOK Mark III DiSEqC
  6. Manual

emitor SATLOOK Mark III DiSEqC Manual

Hide thumbs

Advertisement

Table of Contents

SATLOOK MARK III
DiSEqC
Manual English
Version: 2.00

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SATLOOK Mark III DiSEqC and is the answer not in the manual?

Questions and answers

Related Manuals for emitor SATLOOK Mark III DiSEqC

Summary of Contents for emitor SATLOOK Mark III DiSEqC

  • Page 1 SATLOOK MARK III DiSEqC Manual English Version: 2.00...

  • Page 2: Table Of Contents

    All information in this publication is based on the latest product information available at the time of printing. Emitor AB reserves the right to make changes at any time without notice and without incurring any obligation. No part of this publication may be reproduced without written permission.

  • Page 3: Description

    Even though the instrument has a lot of functions it is still very easy and flexible. SATLOOK Mark III DiSEqC weights only about 3.5 kg incl. the battery and the carrying-case. More battery-power can be provided by the optional BATSET-unit.

  • Page 4: Operation

    2. Operation: A. Unpacking. Start with unpacking the instrument and check that the following items are in the cardboard box: 1. SATLOOK Mark III DiSEqC instrument. 2. Nylon carrying case with shoulder strap. 3. Car-adaptor 12v. 4. External power supply 220v/13.5v.
  • Page 5 B. Batterycheck. As the instrument has been stored for some time before transportation it is important to check the battery-condition. To do this turn the mainswitch On. When starting the instrument, the monitor turns on in spectrum-mode and LED nr 2 on the front-display will be lit.
  • Page 6 If the LNB is of a Universal type, change polarity by pushing button Nr 0 (13/18v) and Hi-Lo band with button nr * (22 kHz). Both functions are indicated with LED´s on the front-panel. The instrument does also support the DiSEqC level 1.0 standard. Activate the function by pressing the nr 5 button and the corresponding digit for the DiSEqC-function wanted (see below).

  • Page 7: Functions

    3. Functions: Keypad, normal mode: DiSEqC-mode: 1. Picture/Invert. 1. LNB 1 2. Spectrum. 2. LNB 2 3. Expanded spectrum. 3. LNB 3 4. Tuning, display 00-99 on/off. 4. LNB 4 5. DiSEqC-mode. 6. Batterycondition, display LO,0-9,HI. 7. Signalstrength offset, on/off. 7.

  • Page 8: Maintenance

    Adjustments for vertical hold, brightness and contrast are located under the instrument. Contact Your dealer for proper adjustments. SATLOOK Mark III DiSEqC is designed for outside use in rough conditions but it should not be exposed for rain or snow as this can damage or shorten the lifetime of the instrument.

  • Page 9: Technical Specification

    5. Technical Specification: EMITOR SATLOOK Mark III DiSEqC. Input frequency: 950-2150 MHz. Input level: 30-100 dByV-volt. Input impedance: 75 ohm, BNC-kontakt. Audio bandwidth: 5.5 to 8.5 MHz, Mono. Measuring method: 1. Full spectrum, normal or expanded mode. 2. 4.5" B/W-monitor with full picture. Optional with pos/neg-video.

Table of Contents