Resetting The Date And Time - Sony CCD-TR78 Operation Manual (primary manual) Operation Manual

Resetting the Date and Time

Reset the date and time using the DATE(+) and TIME(NEXT) buttons.
(1) Slide the POWER switch to CAMERA.
(2) Turn STANDBY up.
(3) Press DATE(+) and TIME(NEXT) simultaneously until the year indicator flashes in the
viewfinder.
(4) Set year, month, day, time, minute by pressing DATE(+) and TIME(NEXT). Note that when you
keep DATE(+) pressed, the digits advance faster.
To Correct the Date and Time Setting
Repeat steps 3 and 4.
To Check the Date and Time
Press DATE(+) to display the date indicator in the viewfinder. Press TIME(NEXT) to display the time
indicator. When you press the same button again, the indicator goes out.
The year indicator changes as follows:
Note on the time indicator
The internal clock of the camcorder operates on a 12-hour cycle.
12:00:00 AM stands for midnight.
12:00:00 PM stands for noon.
CCD-TR78/TR88/TR98 3-810-917-13.E
33