Summary of Contents for Rockford Fosgate Punch P300-8P
Page 1
Installation assistance available at POWERED ENCLOSURE www.rockfordfosgate.com/r ech P300-8P P300-10 P300-10T P300-12 P300-12T Serial Number: Date of Purchase: 600 South Rockford Drive • Tempe, Arizona 85281 United States Direct: (480) 967-3565 • Toll Free: (800) 669-9899 Installation & Operation R O C K F O R D F O S G A T E . C O M...
Page 5
Design Features Input Level Phase Switch Set the Input Level switch to match the outputs of your Allows you to select the output source unit.(LO - RCA or HI - Speaker Level) phase of the amplifier between 0° and 180°. Auto Turn On Three different automatic turn-on modes can be selected;...
If you do not feel comfortable with Before beginning any installation, wiring your new unit, please see your follow these simple rules: local Authorized Rockford Fosgate Dealer for installation. 1. Be sure to carefully read and understand the instructions Before installation, disconnect the before attempting to install the unit.
Page 7
Installation 2. Prepare the RED wire (power cable) for attachment to the 8. Connect from source signal by plugging the RCA cables amplifier by stripping 1/2” of insulation from the end of the into the RCA/Speaker Harness input jacks, then insert the wire.
Operation/Troubleshooting Adjusting Gain Troubleshooting NOTE: If you are having problems after installation follow the 1. Turn amplifier gain to minimum (counter-clockwise). Troubleshooting procedures below. 2. Turn the source unit volume up to 7/8 maximum (or when Step 1. Check Amplifier for proper connections. Verify that distortion is just inaudible).
Page 9
Some states do not allow limitations on the length of an implied warranty, so this limitation may not apply. No person is authorized to assume for Rockford Fosgate any other liability in connection with the sale of the product.
Need help?
Do you have a question about the Punch P300-8P and is the answer not in the manual?
Questions and answers