Programmable Hard Keys - Alcatel Temporis IP150 Administration And Provisioning Manual

Phone Lock Configures the key to enable or disable the
phone lock. For more information, see
Security section
N/A The programmable key has no function
assigned

Programmable Hard Keys

Temporis IP151, IP251G, IP301G and IP701G models are equipped with
programmable hard keys. You can assign additional functions to those keys, which are
listed on the Programmable Hard Keys page.
The functions that you assign to hard keys apply to each key in idle mode only
You can essentially assign the same functions as in the Programmable Feature Keys, with
the following remarks:
-Line and BLF are not available for Hardkeys
-You can also assign the Network Status function to these keys.
Type Description
Network Status Configures the key to display the Network
Status IPv4 or
IPv6 selection screen when pressed.
Business IP Range Administration and Provisioning Guide
pfk.x.feature = lock_key
pfk.x.feature = unassigned
pfk.x.account = 1,2...
(x: 1-32, function key number;
depends on model)
Parameters
pfk.<hardkey>.feature =
network status
<hardkey> depends on the
model and can be up, down,
select, cancel, flash, hold,
mute, transfer, conf
ed 2.2 124/247