Pa-220 Front Panel - PaloAlto Networks PA-220 Hardware Reference Manual

PA-220 Front Panel

The following image shows the front panel of the PA-220 firewall and the table describes each front panel
component.
Item
1
2
3
Component
Ethernet ports
MGT port
CONSOLE port
(RJ-45)
PA-220 NEXT-GEN FIREWALL HARDWARE REFERENCE | PA-220 Firewall Overview
Description
Eight RJ-45 10/100/1000Mbps
ports for network traffic.
You can set the link speed and
duplex or choose auto-negotiate.
Use this Ethernet
10/100/1000Mbps port
to access the management
web interface and perform
administrative tasks. The
firewall also uses this port for
management services, such as
retrieving licenses and updating
threat and application signatures.
Use this port to connect a
management computer to the
firewall using a 9-pin serial
to RJ-45 cable and terminal
emulation software.
The console connection provides
access to firewall boot messages,
the Maintenance Recovery Tool
(MRT), and the command line
interface (CLI).
If your
management
computer does
not have a serial
port, use a
USB-to-serial
converter.
Use the following settings
to configure your terminal
emulation software to connect to
the console port:
2019 Palo Alto Networks, Inc.
©
15