SOMFY ANIMEO Installation And Operating Instructions Manual
  1. Manuals
  2. Brands
  3. SOMFY Manuals
  4. Controller
  5. animeo
  6. Installation and operating instructions manual

SOMFY ANIMEO Installation And Operating Instructions Manual

Rs-485 motor controller
Hide thumbs Also See for ANIMEO:
Table of Contents

Advertisement

Quick Links

Download this manual
Description: The Animeo RS-485 motor controller is an intelligent motor controller designed to allow digital
control of up to four standard Somfy motors. Catalog numbers: AC - 1860158, DC - 1860159.
Features: In addition to RS-485 serial control, the Animeo RS-485 motor controller allows motor control
through any of the methods below.
Dry contact: Manually operate motors through a low voltage switch
*RTS control: Allows control via any Somfy RTS transmitter or RTS interface
*IR control: Allows control via the Somfy 8 channel IR transmitter
* IR and RTS modules sold separately
Main Power
24V DC
Next MoCo
Master Switch / Dry Contact
Input
Master control to next MoCo
Main Power
110V AC
Next MoCo
Master Switch / Dry Contact
Input
Master control to next MoCo
ANIMEO
RS-485 MOTOR CONTROLLER
INSTALLATION AND OPERATING INSTRUCTIONS
+
-
+
-
Individual Switch /
RS-485 in/out
dry contact control
Individual Switch /
RS-485 in/out
dry contact control
RS-485 in/out
RS-485 in/out

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ANIMEO and is the answer not in the manual?

Questions and answers

Related Manuals for SOMFY ANIMEO

Summary of Contents for SOMFY ANIMEO

  • Page 1 RS-485 MOTOR CONTROLLER INSTALLATION AND OPERATING INSTRUCTIONS Description: The Animeo RS-485 motor controller is an intelligent motor controller designed to allow digital control of up to four standard Somfy motors. Catalog numbers: AC - 1860158, DC - 1860159. Features: In addition to RS-485 serial control, the Animeo RS-485 motor controller allows motor control through any of the methods below.
  • Page 2 Verify each direction moves the shade to its appropriate end limit. *If pressing the up button or initiating a dry contact moves the shade in the down direction, first verify the Animeo switch is properly connected to the appropriate terminals. If this is correct, reverse the motor’s directional wires associated with the switch input which is being tested.
  • Page 3 The programming screen should now look like this: Motor Controller Addressing: The first step in programming is to locate the node id. The 8 digit ID located on the top of the motor controller, illustrated right. The last 6 digits of this is the MoCo base address in decimal.
  • Page 4 Alternatively, one can determine the individual motor addresses by simply adding one to the base address for motor 1, add 2 to the base address for motor 2, and so fourth. This pattern remains the same for all other Animeo RS-485 motor controllers.
  • Page 5 Programming Group Addresses: Assigning group addresses allows any number of motors connected to multiple motor controllers to respond from the same command. A group address may comprise motors/motor controllers from an entire facade, floor, building or motor controllers from a single office. Each channel can be programmed with up to 16 group addresses. To program a group address for channel 1, ensure channel 1 is selected under MoCo channels.
  • Page 6 MoCo Orders: MoCo AC/DC, this sections allows the programmer to set the run times of each shade, tilt and speed tilt if applicable. Backlash setting enables venetian blinds to travel to the lower limit and reverse slats so that slats are horizontal.
  • Page 7 For RTS & IR Module programming and operation refer to the instructions included with each device. Integration with Home Automation or Building Automation Systems: The Animeo RS-485 motor controller family easily integrates into any system with RS-232 or RS-485 capabilities. RS-232 systems will require and RS-232 to RS-485 adaptor.
  • Page 8 Programmable Switch 6 button - 1810828 USB to RS-485 convertor - 9015260 RS-485 Repeater - 1810816 Animeo Decora Single Switch - 1800432 (White) Animeo Decora Single Switch - 1800064 (Ivory) Animeo Decora Dual Switch - 1800074 (White) Animeo Decora Dual Switch - 1800075 (Ivory) DIN Rail - 9011975 (14”)

Table of Contents