Command And Status Word - Siemens SIMATIC FC 45 Function Manual

3.1.2

Command and status word

The control bits of FC 45 are defined in the command and status word.
The command and status word and the variables are generated using UDT 10. The variables
and the associated relative addresses in UDT 10 are shown in the following figure.
Figure 3-1
FC 45
Function manual, Release 03/2006 , J31069-D0167-U001-A2-7618
Assignment of the command and status word (DBW 18) with variable names
Parameterizing
3.1 Parameter data block
3-7