I-021G-P And I-241G-Q Standards Compliance; I-021G-P And I-241G-Q Special Considerations; I-021G-P And I-241G-Q Ont Considerations And Limitations; Upgrade Considerations And Limitations - Alcatel-Lucent 7302 Information Manual

Intelligent services access manager
Table of Contents

Advertisement

23 — I-021G-P and I-241G-Q unit data sheet
23.10

I-021G-P and I-241G-Q standards compliance

I-021G-P and I-241G-Q indoor ONTs are compliant with the following standards:
802.1d support for bridging
802.1p support for mapping service profile on U/S
802.1p support for marking and remarking
802.1p support for Class of Service based on UNI, VLAN-ID, ToS/DSCP
802.1q support for virtual switch based on VLAN
G.711 support for FAX, modem connection, and TTY devices (I-241G-Q ONT
only)
G.984 support GPON standards
G.984.2 support for Amd1, Class B+
G.984.3 support for activation and password functions (I-021G-P ONT only)
G.984.3 support for multicast using a single GEM Port-ID for all video traffic
(I-021G-P ONT only)
G984.4 and G.983.2 support for OMCI interface for ONT management and
provisioning
23.11

I-021G-P and I-241G-Q special considerations

Upgrade considerations and limitations

Existing ONTs that use 7342 ISAM FTTU releases older than R04.06.xx and
R04.07.xx must be upgraded to use R04.00.10 software while assigned to a PON ID
value smaller than 64. For this purpose, if split ratios larger than 1:64 are being
deployed, you may choose to set aside the first PON ID as a staging point.

I-021G-P and I-241G-Q ONT considerations and limitations

Table
Considerations and limitations
Support for up to 32 GEM ports per Ethernet UNI
Support for 7 T-CONTs including the OMCI T-CONT
Ethernet OAM (802.1 ag) is not supported
TPID overwrite is not supported
Anti-spoofing is supported on I-020G-P and I-120G-P ONTs by treating PPPoE packets in the same
manner as IPoE packets when anti-spoofing is configured. Other ONTs do not support anti-spoofing.
802.1x is not supported
IGMPv3 snooping with SSM is not supported
VLAN translation is supported prior to replication for downstream IPTV multicast. The same VLAN
operation must be provisioned for all Ethernet UNIs participating in IPTV multicasting.
(1 of 2)
23-12
November 2013
23-11
lists the considerations and limitations for these ONTs.
Table 23-11 I-021G-P and I-241G-Q ONT considerations and limitations
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
Edition 01
3FE 55873 AAAA TCZZA
ONT Product Information Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 7302 and is the answer not in the manual?

Questions and answers

randy navarro
February 6, 2025

what is the maximum amp. Capacity of external battery for the oxe pabx

March 28, 2025

Does the I-010G-U have an audible alarm ?

Helen De Gabriele
March 28, 2025

Does the I-010G-U have an audible alarm ?

Helen De Gabriele
March 28, 2025

Why do the Power, Connection and ETH sometimes glow very bright of the I-010G-U ?

1 comments:
Mr. Anderson
March 28, 2025

The Power, Connection, and ETH indicators on the Alcatel-Lucent 7302 I-010G-U glow very bright because they are in an active state:

- Power (Green): Indicates the unit is operating on AC power.
- Connection (Green or Green flashing): Indicates a good optical signal or that the ONT is ranging.
- ETH (Green or Green flashing): Indicates a LAN is connected and possibly transmitting traffic.

Bright LEDs show these components are functioning properly.

This answer is automatically generated

This manual is also suitable for:

73607330

Table of Contents

Save PDF