Before Use; When Using The Appliance For The First Time - Panasonic ES-WH90 Operating Instructions Manual

Before use

• Do not use the appliance in dark places.
Please close your eyes when flashing your face with the face
attachment.
Doing so may cause temporary irritation in the eyes.
• This appliance should only be used on bare skin with no
cosmetics, lotions etc.
When using the lotion or shaving agents (gels, etc.), rinse off
the agent thoroughly with water and let the skin dry.
• Be sure to shave the area (body or face).
Before use, wipe away any water or sweat from the treatment
area, and any hair sticking to the skin first.
Hairs or shaving agents stuck to the skin can foul the light
guide. It may become difficult to clean the light guide.
12
ES-WH90_ASIA.indb 12

When using the appliance for the first time

Check that the output level suits your skin.
Treated skin may temporarily turn red or feel painful depending
on the body type or condition of the person using the appliance.
Set the output level to 1 (LV1) and flash the treatment area
once.
After 2 days If there are no skin abnormalities
Set the output level to 1 (LV1) and start treatment on the
area that you want.
• Guide for treatment frequency, time (See page 10.)
If there are no skin abnormalities
After 2 weeks*
*For armpits/bikini line/face: after 1 week
To increase the output level for treatment, flash once on
the treatment area, and check your skin condition for
around 2 days before further treatment. Increase the
output level one step at a time.
• If there is intense pain or
redness after 2 or more
days, stop using the
appliance and consult a
dermatologist.
<Output levels>
Greater treatment effects
LV5
LV4
LV3
LV2
LV1
Minimal pain or irritation
2016/01/20 13:58:31