N-Com R Series User Instructions And Safety
  1. Manuals
  2. Brands
  3. N-Com Manuals
  4. Motorcycle Accessories
  5. R Series
  6. User instructions and safety

N-Com R Series User Instructions And Safety

Hide thumbs Also See for R Series:
Table of Contents

Advertisement

Quick Links

EN
USER INSTRUCTIONS AND SAFETY
Congratulations on your purchase of an N-Com product.
N-Com B601 was made using the most advanced technologies and the best materials.
Long-running tests and thorough system development have allowed the highest audio
quality to be achieved.
For additional information about B601, and to download high-definition instructions as
well as the latest Firmware version, visit the website www.n-com.it
Firmware version:
REFERENCE STANDARDS
The products of the N-Com line are in compliance with standards as per the table below:
B601
Battery
charger
Battery
The Declarations of Compliance can be downloaded from the website www.n-com.it (Download
section).
FCC ID: Y6MNCOM18
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc.
and any use of such marks by N-Com is under license. Other trademarks and trade names are those
of their respective owners.
1.0
The Bluetooth system complies with the main safety requirements and
other applicable provisions of Directive RED 2014/53/EU, Directive
2009/65/EC, Directive 2011/65/CE, Directive 2012/19/EU
Directive 2014/35/EU LVD, 2014/30/EU EMC, 2009/125/CE ErP,
2011/65/EU RoHS, 2012/19/EU WEEE
Directive 2001/95/CE – GPSD, 2013/56/UE BAT, 2014/30/EU
IC: 9455A-NCOM18
B601
R-NZ
Fw 1.1 - 20/04/2018

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the R Series and is the answer not in the manual?

Questions and answers

Related Manuals for N-Com R Series

Summary of Contents for N-Com R Series

  • Page 1 R-NZ The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by N-Com is under license. Other trademarks and trade names are those of their respective owners. Fw 1.1 - 20/04/2018...

  • Page 2: Table Of Contents

    10.1.Sharing music via Bluetooth (A2DP Sharing)....................... 17 SATELLITE NAVIGATOR FOR MOTORCYCLES ................17 N-COM INTERCOM ..........................17 12.1.N-Com “900” / “600” Series Intercom pairing up ...................... 17 12.2.N-Com “900” / “600” Intercom function (one-to-one connection) ..............18 “UNIVERSAL INTERCOM” INTERCOM .................... 18 13.1.Pairing up the UNIVERSAL INTERCOM ...........................

  • Page 3: Warnings And Safety

     When using the N-Com system, comply with all limitations and instructions related to the use of cell phones.  Do not turn on your cell phone or the N-Com system whenever their use is forbidden or when the devices can cause interference or dangerous situations.

  • Page 4: Appropriate Use

    Carry out all operations on the electronic equipment and on the N- Com system with the vehicle stopped, in compliance with Traffic Regulations. Caution: The N-Com system allows reception of the FM radio signal. Any radio licence fees are to the user’s charge.

  • Page 5: Disposal

    1.7. Disposal Refer to this user manual and to manuals related to other parts of the N-Com system in order to disassemble the system from the helmet. Once the system has been disassembled, dispose of it according to the following instructions: ...

  • Page 6: Installation On The Helmet

    Completely remove the gasket as shown in Fig. 1; by doing so you also remove the padding.   Remove the “N-Com” plugs found at the back of the shell gasket and on the left side of the helmet. Fig. 1 Fig.

  • Page 7: Installing The B601 System On The Helmet

    B601 3.1. Installing the B601 system on the helmet  Place the system in the special housing in the back of the helmet, pushing it all the way into the groove (Fig. 2).  Fold the antenna back inside the shell. Fig.
  • Page 8  inserting the metal boom in the groove found in the chin guard coupling frame (Fig. 8). Caution: make sure that the side of the microphone support with the writing “N-Com” is facing inward. Fix the cable inside the helmet and make sure the right fixing clip snaps into its housing (Fig. 9).
  • Page 9 B601 ONLY FOR HELMET N100-5 – positioning of wiring and microphone Positioning the left side wiring: Lift up the plastic lining of the cheek padding (Fig. 11).  Fix the cable inside the helmet and make sure the left fixing clip snaps into its housing (Fig. 12). ...
  • Page 10 FOR N87 – N100-5 HELMENTS ONLY – positioning the keypad Important: Installation of the keypad on the N87, N100-5 helmets requires the use of the “KEYPAD ADAPTER” accessory, which is included in the package. Insert the support specific for your helmet in the flex cable of the keypad (Fig. 14). ...

  • Page 11: Removing The B601 System From The Helmet

    Fig. 24 Note: Before using the N-Com device for the first time, recharge the battery completely for at least 10 hours. To obtain best performances from the battery, it is recommended to completely recharge the battery the first few times.

  • Page 12: Basic Functions

    4.2. N-Com EASYSET “N-Com EASYSET” is the application that can be used to manage and configure the B601 system. The programme can be downloaded from the Internet site www.n-com.it, in the “Download” section. The functions that can also be managed from the N-Com EASYSET are listed here below with the specific icon.

  • Page 13: Configuration Menu

    B601 CONFIGURATION MENU All Bluetooth pair ups and other adjustments are carried out in this mode. To put the system in “Configuration mode” (starting from a switched off system) press the “ON” key and keep it pressed for 4 seconds, until you hear the voice announcement “ Configuration ”. Once in the “Configuration”...

  • Page 14: Pairing Up With Mobile Phones Or Other Bluetooth Devices

    “ Speed dial 1 “/ “ Speed dial 2” / “Speed dial 3 ”.  On your own mobile phone (paired up and connected to the N-Com system), call the phone number you wish to assign to the selected speed dialling position. The call is interrupted before it...

  • Page 15: Conference Call Function

    During the phone call, press the “ON” key three times (channel 3). Turning off the phone During the phone call, briefly press “ON”. conference call function N.B.: “Telephone Conference” function can only be used with the N-Com series “900” and “600”.

  • Page 16: Managing Two Mobile Phones (Or Bluetooth Devices)

    Turn on the search for Bluetooth devices (smartphone, GPS, MP3 reader) on the device.   Select the N-Com system from the list. If a password is requested, enter the code 0000 (four zeroes). After a few seconds, the connection between the two devices is activated.

  • Page 17: Sharing Music Via Bluetooth (A2Dp Sharing)

    Important: The procedure described below refers exclusively to the pairing up and operation between the B901 and the “900” / “600” series N-Com systems. To pair up to N-Com systems of a range other than the “900” / “600” series, please refer to the procedure described in chapter 14 “Universal Intercom”.

  • Page 18: N-Com "900" / "600" Intercom Function (One-To-One Connection)

    “ Pairing up the Universal Intercom ”. 13.1. Pairing up the UNIVERSAL INTERCOM The N-Com system can be paired up to the other intercom (from now on referred to as Intercom B) as if it was a mobile phone. Make sure the B601 is turned off.
  • Page 19 Press the “ Voice call / Dial last number called ” command. To disconnect the intercom, press “ Hanging up/rejecting a phone call ” command. Note: The N-Com B601 systems keeps an active connection with a mobile phone or a GPS even during  Bluetooth communication with other intercom systems.

  • Page 20: Battery And Recharge

    When the battery is charged, the blue LED goes back to its standard flashing. In case you don’t plan to use the N-Com system for a long time, you need to fully recharge the device before storing it away.

  • Page 21: Summary Table Of Controls

    Next track (Forward) 4 sec Previous track (REW) 4 sec Share A2DP music Connection CHANNEL 1 Disconnection of active intercom Calling CHANNEL 2 Calling CHANNEL 3 *Press any key on the N-Com keypad. **Press the keys at the same time.

  • Page 22: Limited Warranty

     Any damage caused by an accident.  Any change or modification made to the helmet or to the N-Com system by the user or by third parties.  Colour changes or damages caused by exposure to harmful chemical products.

  • Page 23: Validity Of This Limited Warranty

    Legislative Decree 2 February 2002 n. 24. 16.5. Product identification N-Com products are identified by means of a code that allows product traceability and identification. The identification code is listed on the adhesive label applied to the B601 system and on...

  • Page 24: Warranty Registration Form

    17. WARRANTY REGISTRATION FORM Product name B601 Identification code Buyer’s Information Name Last name Address Phone e-mail Dealer’s stamp Date of purchase...
  • Page 25 Certification and Safety Approvals FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
  • Page 26 aux instructions, il peut occasionner des interférences nuisibles au niveau des communications radios. Cependant, il n’existe aucune garantie que ces interférences ne se produiront pas dans une installation particulière. Si cet équipement génère des interférences nuisibles à la réception de la radio ou de la télévision (ce qu’il est possible de déterminer en mettant l’équipement hors tension, puis sous tension), l’utilisateur est invité...
  • Page 27 (5) Industry Canada(IC) Statement Industry Canada(IC) Statement This device complies with RSS This device complies with RSS- - 210 of the Industry Canada Rules. 210 of the Industry Canada Rules. Operation is subject to the following two conditions: Operation is subject to the following two conditions: 1) this device may not cause interference and 1) this device may not cause interference and 2) this device must accept any interference.
  • Page 28 IC Radiation IC Radiation Exposure Exposure Stateme Statemen n t: t: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

This manual is also suitable for:

B601

Table of Contents