Stanley CT06 User Manual page 13

OPERATION
COLD WEATHER OPERATION
Use an oil with the recommended specification from
the HTMA Requirement table. Using oil that is too
viscous (thick) can damage the hydraulic system.
If the tools is to be used during cold weather, preheat the
hydraulic fluid at low engine speed. When using the
normally recommended fluids, fluid temperature should
be at or above 50°F/10°C (400 ssu/82 centistokes)
before use.
Damage to the hydraulic system or compression tool
can result from use with fluid that is too viscous or too
thick.
STORAGE
Replace any damaged or missing safety labels and tags
before storing the tool. Clean, dry and lubricate moving
parts before storage. Store in a clean, dry place.
CT06 User Manual ◄ 13