The Wall Adapter Connector is located to the left of the Developer Board On/Off switch
(labeled Power ) at the rear of the Developer Board.
2. Plug the adapter into a wall outlet.
Note:
Wall-mount
Adapter Connector
Figure 2-3: Developer Board Power Switch and Adapter Connector (Rear)
Serial Communications
USB and RS232 serial interfaces are available for communicating with a PC. The G24
Developer's Kit includes the necessary RS232 and USB cables for connecting to a PC.
To Connect Serial Communication Cables
•
Connect
RS232-1 connector (J300), or the supplied Mini-AB USB cable to the USB connector (J380).
The RS232 and USB connectors are located to the right of the Developer Board On/Off
switch (labeled Power ) at the rear of the Developer Board.
Audio Devices
The G24 Developer's Kit has connectors that support the following audio devices:
•
Headset (supplied)
•
Microphone
•
Speaker
•
Alert Speaker
To Connect Audio Devices
•
Connect the supplied headset to the appropriate connector, labeled HEADSET
on page
The Audio Connectors are located on the left side of the Developer's Board.
April 1, 2006
The G24 Developer Board can also be powered by an external DC power supply. This
option is described in
"Configuration" on page
Power
Indicator LED
Developer Board
On/Off Switch
(Figure
2-3) either the supplied RS232 cable with a male D-type connector to
10)
Developer's Kit
Chapter 2: Developer Board and Interfaces Description
12.
(Figure 2-4,
9