Before You Install; Unpacking; Contents - VeriFone Forecourt Controller Interface Installation Manual

2
The FCI box can hold up to four current loop or RS485 boards (or a combination
of both). Each board can support up to 16 fueling positions. The FCI box comes
with one current loop board installed. Additional boards must be ordered
separately.
• Current Loop Board (Kit # 29721-01) — Supports both current loop and
• RS485 Board (Kit # 29376-01) — Supports RS485 communications and must

Before You Install

This section describes the components supplied with the Forecourt Controller
Interface box.

Unpacking

Carefully inspect the shipping carton and its contents for any damage that might
have occurred during shipment. If anything appears damaged, immediately file
a claim with the shipping company or carrier and notify your Verifone
representative.
Never use damaged equipment. A shock or fire hazard may exist if equipment is
energized in a damaged condition.

Contents

Remove the components from the packaging and place them on a table or
counter top. Make certain you have all the parts listed in Table 1 before you
begin. Contact the Verifone Technical Support Center if you are missing
anything.
Note:
Note:
RS232 communications.
be used for Dresser Wayne CAT/Ovation, Tokheim DPT, Bennett Secure
Payment Module (SPM), and Verifone Secure PumpPAY installations.
Keep the shipping carton and any packing material in case it is necessary
to move components from one location to another or to return the
equipment for service.
One FCI box supports up to 32 fueling positions.
Forecourt Controller Interface Installation Guide
August 11, 2016