Operation
6.3 Configuring
6.3.2.3
Translational motion, linear encoder
Settings on the display using the example above:
Scenario A:
1. Parameterization:
1.1 Monitored motion:
1.2 Encoder type:
1.3 Encoder selection:
1.6 Initiator settings:
The speed limits (rpm) to be set refer to the frequency at initiator E1.
Scenario B:
1. Parameterization:
1.1 Monitored motion:
1.2 Encoder type:
1.3 Encoder selection:
1.5 Encoder resolution:
1.6 Initiator settings:
The speed limits (rpm) to be set refer to the frequency at the encoder.
Scenario C:
1. Parameterization:
1.1 Monitored motion:
1.2 Encoder type:
1.3 Encoder selection:
1.5 Encoder resolution:
The speed limits (rpm) to be set refer to the frequency at the encoder.
54
Resolution E1
Resolution E2
Resolution E2
Translational
Lin. encoder
E1+E2
15 pulses/rev.
15 pulses/rev.
Translational
Lin. encoder
Encoder+E2
4 mm/pulse
15 pulses/rev.
Translational
Lin. encoder
Encoder
4 mm/pulse
3TK2810-1 safety-related speed monitor
System Manual, 01/2011, 926246402000 DS 02