Table of Contents
Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2018 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
18j
Advertisement
Table of Contents
Related Manuals for Ames Instruments 64170
Summary of Contents for Ames Instruments 64170
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Important Safety Information
Make sure your hands are dry Avoid body contact with grounded before operating the Camera. surfaces such as pipes, radiators, ranges and refrigerators. Page 2 For technical questions, please call 1-888-866-5797. Item 64170... -
Page 3: Camera Safety
Service There are no user serviceable parts. Camera service must be performed only by qualified repair personnel. Item 64170 For technical questions, please call 1-888-866-5797. Page 3... -
Page 4: Specifications
Imager Head and Cable 14°F to 176°F Operating Temperature JPG images (640 x 480) Image Capture AVI videos (360 x 240) USB to Mini-B Cable Video Output RCA Cable Memory Micro SD Card Page 4 For technical questions, please call 1-888-866-5797. Item 64170... - Page 5 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Item 64170 For technical questions, please call 1-888-866-5797. Page 5...
-
Page 6: Setup- Before Use
To reduce the risk of injury, user must read owner’s manual. Wear ANSI-approved eye protection. To prevent electric shock, do not allow product to Video Out contact live electrical parts. 64170 Serial: Port Page 6 For technical questions, please call 1-888-866-5797. Item 64170... -
Page 7: Installing/Replacing Batteries
Display Screen. Out Port, then plug other end into RCA Video In Port on monitor. b. To remove card, push down on the card until it pops up, then remove. Item 64170 For technical questions, please call 1-888-866-5797. Page 7... - Page 8 Before inspecting an engine, turn off the automobile. Handheld Display Unit Controls Power Zoom In Playback Right/ Flip Image/ Brighten Light Trash Can Camera/ Left/ Video B a c Dim Light Settings/ Down/ Zoom Out Back Page 8 For technical questions, please call 1-888-866-5797. Item 64170...
-
Page 9: Live Viewing
OK to start and stop. to view files on another device. When finished, press the Power button to turn the Camera off, then clean and store according to “Inspection and Maintenance” on page 10. Item 64170 For technical questions, please call 1-888-866-5797. Page 9... -
Page 10: Inspection And Maintenance
Charge Battery, if it won’t take a charge, have it replaced by a qualified technician. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Page 10 For technical questions, please call 1-888-866-5797. Item 64170... -
Page 11: Please Read The Following Carefully
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Item 64170 For technical questions, please call 1-888-866-5797. Page 11... -
Page 12: Limited 90-Day Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.
Need help?
Do you have a question about the 64170 and is the answer not in the manual?
Questions and answers