TC-22LR30
6 HOW TO REPLACE CIRCUIT BOARD ASSEMBLIES
6.1.
REPLACEMENT PROCEDURES FOR THE BOARDS IN THE LCD TV
PORTION
6.1.1.
Before the replacement of the Boards in the LCD TV portion
Remove the Back Cover Unit.
When installing the Back Cover Unit, be careful not to over tighten the Screws. When using an electric driver, use one with an
adjustable torque range. Using too much torque may damage the screw head so that it cannot be tighten.
6.1.1.1.
Replacement procedures for DV-Board, HA-Board
When installing each Board, be careful not to over tighten the Screws. When using an electric driver, use one with an adjustable
torque range. Using too much torque may damage the screw head so that it cannot be tighten.
24