Resetting Factory Default Data - INIM Electronics Previdia Compact Manual For System Configuration, Commissioning And Maintenance

2.5

Resetting factory default data

The resetting of the factory default data and consequent deletion of the
configuration data on the Previdia Compact control panel can be done in
two ways:
• Selecting the Factory data option from the programming menu (refer
to paragraph 2.2).
• Using the buttons available on the plastic support of the electronic
boards, as shown in the figure [A]:
1. Press the FACTORY button.
2. While holding down the FACTORY, button, press the RESET button
then release it.
After confirmation of the request for reset to factory default data, the control panel will carry out the same operations as
at first startup, described at the beginning of this manual.
A progress bar will confirm factory data resetting in course.
10
Fire detection and extinguishant system
A
Configuration