Table of Contents
Advertisement
07
Controlling
Your Heater
Using The Smart Life App
1.
You can use the Smart Life app to control your Wärme Designer Heater. The status of your heater is shown on the
device list:
• O line (device is turned o at the wall / I/0 switch)
• Turned o (device is in standby mode)
• Turned on (device is in heating mode)
When the heater is online, tap the device name to go to the control interface.
(Please note: When the heater is o line you will not be able to control it with the app).
Controlling Your Wärme Designer Heater
The Control Interface
Target
temperature
Adjust temperature
up/down
Power on/o
Select day or weekly
programming
For more information visit: www.designerheater.com
LCD display on/o
Current room temperature
24 hour clock
(for weekly programming)
Countdown timer
Heating modes
(Comfort, economy, anti frost)
14
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the WH-24P and is the answer not in the manual?
Questions and answers
What is the standby on my WH24P I need to reset the Wi Fi I have lost connection
The standby mode for the Wärme WH-24P heater is when the device is turned off but still connected to power.
To reset the Wi-Fi connection, press and hold the key for three seconds. This will switch the heater to secondary connection mode. The heater has two connection modes:
1. Icon flashes slowly.
2. Icon flashes fast (most devices connect in this mode).
Once connected, the heater will beep and display a solid icon.
This answer is automatically generated
My heaters display is keep flashing at every 5 seconds and not turning it on
The Warme radiator displays the temperature and other details but its not get heated up at all. It was working fine for about a year but suddenly this happened. Please help.
The Wärme WH-24P radiator may not be heating up due to several possible reasons:
1. Power Supply Issue – Ensure the heater is properly connected to a working power outlet and that the voltage matches the rating plate (230V ~ 50Hz).
2. Damaged Cable or Plug – If the power cord or plug is damaged, the heater will not function. It must be replaced by the manufacturer or a qualified technician.
3. Safety Shutdown – If the heater has overheated or encountered an issue, it may have shut off for safety reasons. Allow it to cool completely before restarting.
4. Control Settings – Check if the heater is set to the correct heating mode (Comfort, Economy, or Frost-free) and that the target temperature is appropriately set.
5. Blocked Airflow – Dust buildup on the grilles may affect performance. Clean the grilles using a vacuum cleaner.
6. Internal Malfunction – If none of the above solutions work, an internal component may have failed, requiring professional inspection or repair.
Ensure the heater is disconnected from power before performing any checks or maintenance.
This answer is automatically generated
One of the feet of an electric heater WH 24P has broken and looking for where to get a replacement.
My WH-24P , when I switch it on the display flashes at 25° then clicks every few seconds. I have tried switching the power off and pressing the power button to try and reset but is still flashes.