Table of Contents
Advertisement
INSTALLATION
INDOOR INSTALLATION
Select the location for fan mounting which minimizes noise
generated by fan operation，and allows sufficient access for
Mounting Bracket
installation and maintenance. Secure the mounting bracket
to the support beam with screws.
Insert the studs into the holes of the mounting bracket. Secure the
fan to the mounting bracket with self-tapping screws.The position
of the junction box should be convenient for wiring.
Stud
Hole
Connect the ductwork. Use duct tape to secure all of
the ductwork connections so that they are air tight. A backdraft
damper installed at the outlet is highly recommended to prevent
cold air from entering the dwelling.
Note: Install with enough clearance (1/4") between the coupling
and the top of the junction box to enable accessibility.
2
Advertisement
Table of Contents
Need help?
Do you have a question about the PRF-150 and is the answer not in the manual?
Questions and answers