Cleaning And Maintenance - Sharp EM-100PM-ST Instruction Manual

2. Place the grinding cup on a flat surface with the open ending facing up. Fill the cup with
your favorite ingredients (eg. Soybean, coffee bean). Be sure not to fill ingredients exceed
the MAX mark, the max capacity is 50ml.
3. Assemble the cup base onto the opening end of the cup by turning it in clockwise.
4. Upend the assembly of cup and cup base, and insert them into the motor unit, make sure
arrow on the motor unit align with the cup base, then turn the cup base in clockwise to lock
them .
5. Connect the plug to wall outlet and turn the speed selector to the desired setting. The setting
1 is the lowest speed and the setting 2 is the highest speed.
NOTE: Do not operate this appliance continuously for more than 1 minute, allow appliance to
cool down for 3 minutes between two continuous cycles.
6. When the operation is finished, unplug the power outlet . Then turning the cup assembly in
anti -clockwise to remove them.
7. Upend the cup assembly, hand the cup with one hand, and turning the cup base in anti-
clockwise with the other hand to remove it.

CLEANING AND MAINTENANCE

-After use, reassemble the jar(or cup) and pour a little warm water into it and turn the speed
selector to Pulse position for a few seconds to remove the residual food.
-After stop, remove the jar (or cup) from the motor unit and rinse the jar (or cup) under running
water.
-Wiping the outer surface of motor unit with a damp cloth, do not use abrasive cleansers. Never
immerse in water or other solution for cleaning.
-Dry all parts and then replace them.
Warning: Do not use abrasive cleansers. Never immerse in water for cleaning.
Note: The blade is very sharp, handle carefully when clean.
8