Related Manuals for Vibe Slick SLR 12 Active Limited Edition
Summary of Contents for Vibe Slick SLR 12 Active Limited Edition
- Page 1 INSTRUCTION MANUAL Slick SLR 12 Active Subwoofer Enclosure Model: SLR12A LIMITED EDITION To ensure maximum performance and safety, please follow this manual. Please retain the manual for future reference after www.vibeaudio.co.uk installation...
- Page 2 Thank you for buying VIBE, we hope you enjoy listening to your product as much as we enjoyed creating it.
-
Page 3: Run-In Procedure
RUN IN PROCEDURE VIBE recommends that you follow the run in procedure for the subwoofer detailed below. When your subwoofer is used for the fi rst time it is very stiff and rigid, it will take time for the moving parts of this subwoofer to loosen up before it will be ready to deliver its full potential. - Page 4 Slick SLR 12 Active Limited Edition Subwoofer Enclosure ACTIVE ENCLOSURE INSTALLATION Your VIBE SLR enclosure is designed with a swift installation routine in mind. Please mount the enclosure in a dry location on a solid surface. NEVER mount the enclosure upside down, this will cause the amplifi...
-
Page 5: Input Connections
Slick SLR 12 Active Limited Edition Subwoofer Enclosure GROUND CABLE • The ground cable needs to carry the same current as the power cable. At least a 10 gauge cable should be used. • The amplifi er ground should be connected directly to the chassis of the vehicle, to bare metal. - Page 6 Slick SLR 12 Active Limited Edition Subwoofer Enclosure AMPLIFIER CONNECTIONS & CONTROLS A. LOW LEVEL INPUT Low level input for connection to any source (headunit) with a low level output. This is your RCA output from the source (headunit). B. HIGH LEVEL INPUT To be used when no RCA’s are available.
-
Page 7: Setup Section
Slick SLR 12 Active Limited Edition Subwoofer Enclosure SETUP SECTION To correctly set the gain control of the amplifi er to match that of the source (headunit) use the following setup routine: • Turn the gain control to minimum on the amplifi er. -
Page 8: Troubleshooting
Slick SLR 12 Active Limited Edition Subwoofer Enclosure TROUBLESHOOTING Before removing the amplifi er, refer to the list below and follow the suggested procedure. Always test the speakers and confi rm that they are wired correctly fi rst. If in any doubt get help from a qualifi... -
Page 9: Limited Warranty
This is a comprehensive limitation of liability that applies to all damages of any kind, including (without limitation) compensatory, direct, indirect or consequential damages, loss of data, income or profi t, loss of or damage to property and claims of third parties. For the avoidance of doubt, VIBE does not limit its liability for... -
Page 10: Specifications
Slick SLR 12 Active Limited Edition Subwoofer Enclosure SPECIFICATIONS RMS Power Peak Power SLICK SLR12A 400 Watts 1200 Watts In order to protect your purchase and aid your warranty please fi ll in the following form and keep it safe for your future reference. - Page 12 twitter.com/vibeaudio youtube.com/vibeaudio...
Need help?
Do you have a question about the Slick SLR 12 Active Limited Edition and is the answer not in the manual?
Questions and answers