Gps Logger Led Indicators - I-gotU GT-120 Manual

GPS Logger LED Indicators

The following lists various LED indications of GPS Logger:
Main indication:
Power On
The blue LED indicator blinks once.
Operation: Long press (1.5 seconds) the button to power on GPS Logger.
Note: When the device is powered on and starts tracking, the
with firmware versions older than 3.0, the blue LED indicator blinks every 16 seconds.
Data Logged
Both the red and blue indicators blink simultaneously twice.
Status: Device is powered on and GPS data has been logged successfully.
Power Off
Long press the button, and the
Memory full / Battery low
The red LED blinks: twice / once.
BT Pairing
The blue and red LED indicators blink in turn for 5 minutes during pairing mode.
blue LED indicator blinks every 4 seconds. For GPS Loggers
red LED stays red until GPS Logger is powered off.