Email Configuration - Lantronix WiPort User Manual

Datagram Mode
Datagram Type
Accept Incoming
Endpoint Configuration
Local Port
Remote Port
Remote Host
Change Address Table

Email Configuration

The unit sends an Email to multiple recipients when a specific trigger event occurs.
There are three separate triggers, based on any combination of the configurable pins
when selected as user I/O functions. Optionally, use a two-byte serial string to initiate
WiPort™ User Guide
Figure 4-7. UDP Connection Settings
Configures remote IP or network broadcast address and the
remote port. Enter 01 for directed or broadcast UDP.
Select Yes to accept incoming UDP datagrams.
Enter the local port number.
Enter the port number of the remote device.
Enter the IP address of the remote device.
Field enabled when Datagram Type is set to FD. Enter values
between 1-255 to identify units on the local network of device
servers.
Configuration Using Web-Manager
27