Installation Procedure; 1Installation - Canon Additional Finisher Tray-A1 Installation Procedure

1.2 Installation Procedure

1.2.1 Installation
1) In the case of the Finisher-Q1/R1, open the front
door [1], remove the 3 screws [2], and detach the front
cover [3].
[1]
[2]
[3]
[2]
2) In the case of the Saddle Finisher-Q2/R2, open the
front cover [1].
[1]
3) In the case of the Finisher-Q1/R1, remove the 3
screws [1], and detach the rear cover [2].
0003-2137
F-1-3
F-1-4
[2]
[1]
4) In the case of the Saddle Finisher-Q2/R2, detach
the cable cover [1], remove the 6 screws [2], and
detach the rear cover [3].
[3]
[2]
5) Remove the 2 screws [1], and open the upper cover
of the finisher; then, detach the upper left cover [3] as
if to pull out the claw [2].
Chapter 1
F-1-5
[1]
F-1-6
5