Table of Contents
Advertisement
Taste
|
Innovation
TROUBLESHOOTING ICOFFEE'S SINGLE SERVE BREWERS.
If any problems persist after taking the following action(s), contact Customer Service at
1-661-257-0810 for assistance.
PROBLEM
Brewer doesn't turn on
ACTION TO TAKE
• Plug brewer into an independent outlet.
• Ensure the brewer is plugged in securely.
• Plug into a different outlet.
• Check your circuit breaker and reset if necessary.
PROBLEM
Brewer brews a partial cup
ACTION TO TAKE
• De-scale the brewer.
PROBLEM
Brewer won't brew
ACTION TO TAKE
• Ensure the brewer is on.
• Ensure you have opened and closed the UPPER BREW JAW and the Red HEATING LIGHT
and the BREW BUTTON are flashing.
• If the ADD WATER light is illuminated, add water.
PROBLEM
Brewed Beverage is too light or strong
ACTION TO TAKE
• To obtain a stronger brew, reduce the amount of water you are adding to the water
fill area. To obtain a lighter brew, increase the amount of water you are adding to
the water fill area. Remember, when brewing you must use a minimum of 4 oz (or
a maximum of 12 oz) of water for each brew and use the correct cup size to avoid
overflowing.
10
|
Technology
TM
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the iCoffee EXPRESS and is the answer not in the manual?
Questions and answers
I BOUGHT THE UNIT USED, I ASSUMED IT WAS ALREADY PRIMED. NO MATTER WHAT LEVEL I ADD WATER TO, THE MACHINE TELLS ME TO ADD WATER.
The Remington iCoffee EXPRESS may indicate to add water even when water is added if the red float ball has not yet reached the "INITIAL PRIME LINE" or if an air bubble is still visible above the float ball. This means the boiler tank is not yet full. Water should be added until the float ball slightly passes the initial prime line and the air bubble disappears. At that point, the user should stop adding water.
This answer is automatically generated