Snmp Setup; Community Table; Host Table; Trap Setting - Asus GigaX1024i+ User Manual

Chapter 4 - Configuration Management
4.4 SNMP
Simple Network Management Protocol (SNMP) is used to manage the
network. You may use the SNMP configuration page to enable or disable
the SNMP support.
To provide more secure management and access control, SNMPv3 is
supported. SNMP has the following configuration parameters:

4.4.1 Community Table

You can enter different community
names and specify a write-access
p r i v i l e g e t o t h e c o m m u n i t y b y
c h e c k i n g t h e c h e c k b o x . C l i c k
<OK> to save the configuration or
<Reload> to refresh the page.

4.4.2 Host Table

This page links the host IP address
to the community name that is
entered in Community Table page.
Type an IP address and select the
community name from the drop-
down list. Click <OK> to save the
configuration or <Reload> to refresh
the page.

4.4.3 Trap Setting

By setting the trap destination IP
addresses and community names,
you can enable SNMP trap function
to send trap packets in different
versions (v1 or v2c). Click <OK> to
save the configuration or <Reload>
to refresh the page.
30
Figure 29. Community Table
ASUS GigaX 1024i+
Figure 30. Host Table
Figure 31. Trap Setting