Undersink Installation - AlkaWay UltraStream Manual

Undersink Installation

Congratulations on choosing the AlkaWay Undersink Kit for your UltraStream
water system. By following the steps in this instruction sheet you'll have the
best of both worlds - fabulous UltraStream water - and clear bench space,
with minimum of fuss.
We have designed our undersink kit to be fully compatible with
the UltraStream benchtop unit.
• Ceramic Faucet valves
• Manufactured in same USA factory
• Vented faucet design for safety
• John Guest attachments for simple install
• Video support for install (support.alkaway.com)
• Step by step instructions
Handy Tips
Familiarize yourself with
'John Guest'. These
are special patented
connection tools that allow
ultra-simple connection of
hoses and pipes. To attach
a hose, all you need to do
is push the hose into the
fitting.
To remove, all you need do
is push on the collet (ring)
around the hose and pull
on the hose at the same
time, using the John Guest
Tool (or fingernail).
It's important to remember
to ensure the end of the
hose is cut cleanly and at
right angles.
John Guest Connection
p7