Advertisement
Quick Links
QAS-1512
QAS-1545
IMPORTANT
Record your combination.
Record the serial number from the tag on the door front.
Keep keys and combination in a secure place away
from children.
DO NOT STORE YOUR KEYS OR
COMBINATION INSIDE THE SAFE.
Hardware Included:
(4) M6 x 20 mm (3/4" long) Screws
(4) Washers
Tools Required:
Drill
Flat Head Screwdriver
10 mm Wrench
3/16" (5 mm) drill bit for drilling into wood
®
Instructions
CONTROL FEATURES
1.
Key lock
2.
Combination buttons
3.
Reset button (inside safe)
4.
Battery Compartment (inside safe)
GETTING STARTED
When you rst receive your safe you will need to
open the door with the key in order to install the
ba eries. Ba eries are included and are located
inside the safe.
NOTE:
is key has also been provided incase you
lose or forget your security code or the ba eries run
low. If you lose your key, you may purchase a
replacement key by referencing the serial number
located on the front of the door. See section
regarding replacement keys for further information.
To open the safe, insert key into lock and turn
clockwise until the door automatically opens.
NOTE: You must turn the key back to the locked
position before you are able to close and lock the
door.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Stack-On QAS-1512
Summary of Contents for Stack-On QAS-1512
- Page 1 CONTROL FEATURES ® Key lock Combination buttons QAS-1512 Reset button (inside safe) Instructions QAS-1545 Battery Compartment (inside safe) IMPORTANT Record your combination. Record the serial number from the tag on the door front. Keep keys and combination in a secure place away from children.
- Page 2 INSTALLING THE BATTERIES PROGRAMMING YOUR OWN ELECTRONIC COMBINATION NOTE: Do not mix old and new ba eries. Do not • For security you must program your own mix alkaline, standard or rechargeable ba eries. combination a er opening the safe. •...
- Page 3 TURNING THE KEYPAD SOUND OPENING THE SAFE USING OFF/ON YOUR COMBINATION Enter your combination using the bu ons. Your safe comes with the "Beep" sound turned on. bu ons will light up green and there will be one “beep” for every entry (if the sound is turned on). If You can turn o the "Beep"...
- Page 4 1, for the locking mechanism to function properly. Failure to mount the safe in the corrrect upright position will compromise the safety and security of the safe. Figure 1 QAS-1512 QAS-1545 QAS-1512...
Need help?
Do you have a question about the QAS-1512 and is the answer not in the manual?
Questions and answers