Hitachi Compute Blade 500 Series Function Manual page 26

11. Diagnostic function in LAN devices
When Intel PROSet is installed, do not perform the diagnostic test by clicking
[Diagnostics] under the [Link Speed] tab in the LAN device [Properties]. If you
performed the diagnostic test, linkdown could not be detected. If you have performed
the diagnostic test, be sure to reboot the OS.
12. When setting LAN device priorities, traffic may not failback to the Primary LAN Device
from the Secondary LAN Device. Set [Activation Delay] to three seconds or more
when using a team. See "How to Change Activation Delay", for details.
13. The network connection may temporarily disconnect when you change the settings for
Intel(R) PROSet. Use the Remote Console(not Remote Desktop), when you change
configuration of Intel(R) PROSet.
14. When the network is under heavy load conditions, the LAN driver may rarely detect a
temporary linkdown. It will be linked up in a second or two after detecting the
linkdown. With a redundancy configuration using a team, LAN devices will be switched.
(Windows Server 2008 only)
When teaming and Tag VLAN setting(or removing), the following popup screen saying
"NCS2Prov Module has stopped working" may appear and "Application Error"
generated in "NCS2Prov.exe" may be recorded in application logs. When the popup
screen appears, select [Close].
Confirm that the teaming and Tag VLAN is set(or removed) in [Device Manager] and
check that communication can be properly done via the adapter that Tag VLAN was
set to.
2-8
Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
LAN Advanced Functions