Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for decoflame DENVER E-RIBBON FIRE
Summary of Contents for decoflame DENVER E-RIBBON FIRE
- Page 1 ® USER MANUAL ENGLISH DENVER E-RIBBON FIRE™...
-
Page 2: Table Of Contents
Keep the manual in a safe place for future reference. IT IS IMPORTANT THAT YOU READ THE ENTIRE INSTALLATION AND OPERATING INSTRUCTIONS AND ADHERE TO THE SAFETY MEASURES DESCRIBED IN THIS DOCUMENT – DECOFLAME CANNOT BE HELD RESPONSIBLE FOR ANY DAMAGE CAUSED AS A RESULT OF NON-ADHERANCE TO THESE INSTRUCTIONS. -
Page 3: General Safety
1. GENERAL SAFETY Naturally, safety is imperative when dealing with open fire. All Decoflame fireplaces are designed, man- ufactured and quality-tested in Denmark with the highest product safety and user-friendliness in mind. This fireplace features the state-of-the-art, patented Decoflame e-ribbon Fire™ with CEVB Technology (Controlled Ethanol Vapour Burning Technology), which can be operated by remote control or on the operating panel. -
Page 4: Placement Under A Tv
NB – we do not recommend to position TV screens or valuable paintings above the fireplace as the up- wards drifting warm air might damage those. Should you still want to create a setting incorporating a TV above the fireplace, please follow the instructions below (figure 1.2) or ask Decoflame for further advice. Figure 1.2 min. -
Page 5: Maintenance
Please refer and adhere to the detailed installation guide on your technical drawing, which has been generated for your specific custom-made Decoflame fireplace. You will find all dimensions and a step- by-step installation instructions there. It is advisable to install your Decoflame fireplace only once all decoration work in the room has been finished. -
Page 6: Creating A Wall Cut-Out
Please note that the electronically controlled Denver e-ribbon Fire™ needs an earthed connection to the mains in order to work. Therefore, a power socket needs to be present inside the cut-out into which the fireplace will be fitted. when installing your Denver e-Ribbon™ fireplace you will need: •... -
Page 7: Wall Construction
The scope of delivery contains: the Denver e-Ribbon Fire with its base plate which is fitted to the tank and electronics of the e-Ribbon Fire, a power cable, one remote control, a manual with serial number, a funnel, small plastic bags with fitting brackets, and one or more glass screen/s with glass holders if specified in the technical drawing (figure 1.5),... -
Page 8: Installation Of Tv The Temperature Sensor
STEP 2: Lift the Decoflame Denver e-Ribbon Fire carefully out of its packaging holding it at the straps. Do not lift it by inserting your hands into the openings of the lids left and right. Place the Denver e-Ribbon Fire™... -
Page 9: Layouts
4.2. LAYOUTS Decoflame strongly recommends installing one or more glass shields in order to protect the flame from draught, while keeping it vivid. Please see bellow (figure 1.4) the situations where the glass is optional and where it is mandatory. -
Page 10: Operating Instructions
During operation of the fire, you could close the lid of the LCD-display completely by pressing down gently onto it. You can still use the remote control / Decoflame App in order to change the flame level settings or to shut down the fire, despite the display not being visible. - Page 11 IGNITION Press the START button / icon on the remote control / on the display bottom right /on the Decoflame App. The display will show the message wARMING UP and the filament in the flame tray will start glowing.
-
Page 12: Via Bluetooth / Decoflame App
5.1. VIA BLUETOOTH / DECOFLAME APP . Once your device is paired, the fireplace 1. Download and install the Decoflame should be visible on the app. You are now App by scanning the QR code above cor- responding to your smart device’s operat- able to change the name of the fireplace. -
Page 13: With A Smart Home Connection
5.2. wITH A SMART HOME CONNECTION GENERAL INFORMATION Your Denver e-Ribbon Fire is equipped with a hardware and software which allows connecting and controlling it via a Smart Home System. RS- 232 CONNECTION Connecting your system to the Decoflame e-Ribbon fire™ using its RS232 port with the following param- eters: •... - Page 14 The following comments allow you to request STATUS information from the Decoflame e-Ribbon Fire™ – i.e. the set currently set flame level or any error messages -, the remaining fuel level in the tank, the fuel consumption, the heat output and the remaining operation time set by engaging the timer function: <0x9000>= Get tank level in % of full...
- Page 15 ExAMPLE OF HOw TO USE THE PROTOCOL FOR wIRED ETHERNET we would like to show here how to start the fireplace from Real Term, which is a terminal program which can be downloaded free of charge. Display Select <Hex[space]> so the received characters can be read in the same format as described. Open port Here the connection is made to COM4 on the PC.
- Page 16 Send Now we are ready to send the command in order to turn the fireplace on. Type the shown numbers click on <Send Numbers> Then, the controller will respond with the following: Now the connection between the controller and the e- Ribbon Fire™ has successfully established. ®...
-
Page 17: Messages On Lcd Display And Troubleshooting Advice
No Flame The fire turns to auto- The heating element or the pump is Call your point of sale or Decoflame on +45 96 30 48 00 (only switch-off mode (the not working. English-speaking staff available) and have the serial number to display can also show hand (can be found on the reverse side of the lid of the fuel inlet). -
Page 18: Safety Advice
DO NOT modify anything on your custom-made Decoflame bioethanol fireplace. 8. DISPOSAL AND RECYCLING The made to measure Decoflame bioethanol fireplace is made of aluminium, stainless steel (optional: glass), copper, plastics and electronic components. If you wish to dispose of the appliance, please adhere to the regional rules and regulations. -
Page 19: Rating Plate
9. RATING PLATE Below you will see the rating plate for your custom-made Decoflame bioethanol fireplace with e-Rib- bon Fire™. The same rating plate can be found on the reverse side of the lid of the fuel inlet. ®... - Page 20 ® Decoflame ApS Stenholm 14 9400 Nørresundby Denamark tlf. +45 9630 4800 info@decoflame.dk www.decoflame.com...
Need help?
Do you have a question about the DENVER E-RIBBON FIRE and is the answer not in the manual?
Questions and answers