Spare Parts - Hafco MetalMaster EB-260V Operation Manual

Page 25
TROUBLE SHOOTING Cont.
SAW BLADE DOES NOT CUT SQUARE.
Check to see if the saw blade is cutting square. If the blade is
not cutting square as per the example (Fig. 5. 17)
1. Replace with a new blade and check for squareness. The
workpiece should be as per Fig. 5.18
2. Inspect the blade guides to see if there is a gap between
the bearings and the blade (Fig.5.19)
F . 5.19
ig
The following section covers the spare parts diagrams and lists that were current
at the time this manual was originally printed. Due to continuous improvements
of the machine, changes may be made at any time without notification.
1. Have your machines model number, serial number & date of manufacture
on hand, these can be found on the specification plate mounted on the
machine
2. A scanned copy of your parts list/diagram with required spare part/s
identified
3. Go to www.machineryhouse.com.au/contactus
attaching a copy of scanned parts list.
Instruction Manual for EB-260V (B062V)
OPERATION MANUAL
SPARE PARTS SECTION
HOW TO ORDER SPARE PARTS
F
F
and fill out the inquiry form
25
. 5.17
ig
. 5.18
ig
04/04/2019