Advance acoustic X-Uni Quick Start Manual

Advance acoustic X-Uni Quick Start Manual

Multisources audio system
Hide thumbs Also See for X-Uni:

Advertisement

X-Uni
Multisources audio system
Système audio multisources

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the X-Uni and is the answer not in the manual?

Questions and answers

Summary of Contents for Advance acoustic X-Uni

  • Page 1 X-Uni Multisources audio system Système audio multisources...
  • Page 2 RECYCLING IN EUROPEAN UNION COUNTRIES Disposal of your old appliance English Swedish This symbol on the product or on its packaging means that your electrical and electronic equipment should be disposed Märkningen av produkter och fôrpackningar med denna at the end of life separately from your household wastes. symbol betyder att elektrisk och elektronisk utrustning maste There are separate coilection systems for recycling in EU.
  • Page 3 WARNING ATTENTION ATTENTION: afin de réduire tout risques de chocs électriques ou de feu, ne pas exposer votre appareil à l’humidité ou à toutes sortes de liquides WARNING: to reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. WARNUNG: Um die Gefahr eines Brandes oder eines Stromschlags zu mindern, halten Sie das Gerät von Nässe und Feuchtigkeit fern.
  • Page 4 CONSIGNES DE SECURITE ISTRUZIONI DI SICUREZZA LIRE LES INSTRUCTIONS LEGGERE ATTENTAMENTE TUTTE LE ISTRUZIONI Toutes les consignes de sécurité et instructions quand à sulla sicurezza e sul funzionamento prima di utilizzare l’ap- l’utilisation de notre produit doivent faire l’objet d’une lecture parecchio.
  • Page 5 SAFETY INSTRUCTIONS READ INSTRUCTIONS HINWEISE LESEN Alle Sicherheits- und Bedienungshinweise müssen gelesen werden, All the safety and operating instructions should be read before the bevor das Gerät in Betrieb genommen wird. appliance is operated. HINWEISE AUFBEWAHREN RETAIN INSTRUCTIONS Die Sicherheitshinweise und die Bedienungsan-leitung müssen zur spä- The safety anil operating instructions should be retained for future teren Verwendung aufbe-wahrt werden.
  • Page 6 FENTE D’INSERTION DU DISQUE Un sytème de chargement motorisé Slot-in équipe votre X-Uni. Mettez le disque correctement centré dans la fente, face imprimée sur le dessus. Le disque est alors entrainé par le moteur. L’afficheur indique le numéro du morceau et le temps (en appuyant sur le bouton Display de la télécommande) Pour éjecter le disque, appuyer sur la touche...
  • Page 7 COLOR TOUCH SCREEN Your first contact with your X-Uni iinterface is the color home screen. We think that the various modes will be fairly self-explaination and easy to use but we offer a description of the functionality of each icons.
  • Page 8 Select AUX1 and you can use Select AUX2 and you can use your X-Uni to play back audio your X-Uni to play back audio Your X-Uni has a built-in digital Your X-Uni has a built-in digital...
  • Page 9 OFF. In case of stormy weather, unplug the power and LAN cable. PRISE D’ANTENNE FM Votre X-Uni dispose d’une entrée antenne pour la FM. L’antenne FM peut être une antenne de toit ou une antenne intérieure. Dans le cas où votre antenne utilise un cable double 300 ohms, vous devez lui adjoindre un adaptateur 300/75 ohms.
  • Page 10 WIFI ANTENNA We supply with your X-Uni a WiFi antenna that you can plug on the antenna connector 7B. In order to fix properly this antenna, please turn the screw on the connector. The antenna must be used vertically in order to obtain the best WiFi signal as possible.
  • Page 11 Legal and precautionary notices This product contains software. You have the non-exclusive, non-transferable right to use the software in object code form only, solely to operate this product. Ownership of the intellectual property rights in the software in this product remains in the ownership of the party who provided it (or the respective licensor) and all of their respective rights are reserved.You are strictly forbidden from modifying, translating, reverse engineering, decompiling, disassembling or using other means to discover the source code of the software in this product or otherwise replicate the functionality of the software in this product except to the extent that this restriction is expressly prohibited by applicable law.Except where this is not possible in the territory where you purchased this product, we do not give any warranties in relation to the operation or performance of the software and neither we nor any of our suppliers or licensors shall be liable to you for indirect, special, incidental and consequential losses such as loss of profits arising out of your use of the software in this product. Informations légales et mise en garde Ce produit contient un logiciel . Vous avez le droit non - exclusif et non - transférable d’utiliser le logiciel en code objet uniquement, uniquement pour faire fonctionner ce produit . La propriété des droits de propriété intellectuelle dans le logiciel de ce produit reste la propriété de la partie qui l’a fourni ( ou le donneur de licence respective ) et l’ensemble de leurs droits respectifs sont reservées.Il vous est strictement interdit de modifier, traduire, décompilation , le démontage ou l’utilisation d’autres moyens de découvrir le code source du logiciel de ce produit ou autrement reproduire la fonctionnalité du logiciel de ce produit , sauf dans la mesure où cette restriction est expressément interdite par la loi. Nous ne donnons aucune garantie en ce qui concerne le fonctionnement ou les performances du logiciel et ni nous ni aucun de nos fournisseurs ou concédants de licence doit être responsable envers vous pour des pertes ou problèmes découlant de l’ utilisation du logiciel de ce produit .
  • Page 12 X-Uni Universal source Multisources audio system QuickStart manual This document explains how an end-user may use X-Uni. (Some others languages could be available on www.advance-acoustic.com)
  • Page 13: Table Of Contents

    Contents Introduction ........................1 for end-users ............................1 Box contents ............................2 External resources ..........................2 Conventions used in this manual ......................2 Controls, connectors and display ................. 3 Main controls ............................3 Remote control ............................ 5 Screens ............................... 6 Getting started/setup ..................... 8 Setup wizard ............................8 Other settings ............................
  • Page 14 CD player ........................31 Settings ........................32 Software upgrade and factory reset ............... 34 12.1 Software upgrade ..........................34 12.2 Factory reset ............................34...
  • Page 15: Introduction

    Introduction 1.1 … for end-users This manual describes how to use the Advance Acoustic X-Uni Internet radio, an advanced but easy-to-use Wi-Fi connected audio system with the following modes: o Internet radio with access to over 20,000 stations, ‘Listen again’ broadcasts and podcasts o Music player allowing easy navigation and playback through a USB or network-stored library of music files including AAC+, Real, MP3 and WMA o DAB/DAB+ digital radio with a wide choice of channels and digital quality sound broadcast free-to-air o FM with RDS (Radio Data System) o Digital optical in for external music sources with optical out o Digital coaxial (RCA) in for external musical sources with digital coaxial out o Aux 1 in for external music sources o Aux 2 in for external music sources o CD player to play CD...
  • Page 16: Box Contents

    1.2 Box contents The X-Uni box includes the following items: o X-Uni multi-sources player o Remote control o Antennas o This manual Check that all items are present and contact Advance Acoustic if there are any missing or damaged items. 1.3 External resources To operate X-Uni, the following external resources are needed: o a power source (115-230 V mains supply) o a wired (Ethernet) or wireless (Wi-Fi) network (provided through a router) with appropriate permissions and password if necessary (for Internet radio and Network Music player modes) o broadband Internet access (for Internet radio mode and Internet Software Update) o a music library stored on the network or on a USB mass storage device (for Music player modes) o an external audio source (for Aux1, Aux2, Optical in and coaxial in) 1.4 Conventions used in this manual...
  • Page 17: Controls, Connectors And Display

    Controls, connectors and display 2.1 Main controls Figure 1: X-Uni Buttons and Functions / Boutons et fonctions Home: takes you back to main menu icon screen. Close Back: Return to previous screen. Output level. It is not a volume ouput to use with power amplifier but it’s a level controller in order to obtain same output level as others sources used Directory: In play mode, this button may be used to return to the last track list or station list. Preset: Radio modes: Press to select; There are 10 presets each for DAB and FM modes. Add to presets...
  • Page 18 Information: View more information about the station or track playing. Touch button to show a separate information screen covering the whole play screen area. Stop Pause Play/Pause Previous: Select start of track, previous track or hold to scan down / short press to rewind Next: Select next track or hold to scan up / short press to fast forward Skip track / Fast forward Back track / Rewind Shuffle toggle button (not on all versions) Repeat toggle button (not on all versioN)
  • Page 19: Remote Control

    IR Remote Télécommande EN A-B function Points A and B confirmation FR Fonction A-B Activation point A et point B EN CD Repeat function Single - All Repeat A-B FR Fonctions Repeat du CD Single - All EN General source selector Repeat A-B Push YES on the input button, move with the arrows t or u and confirm your choice by pushing OK FR Sélecteur général de source Appuyer sur YES du bouton input, choisisser la souce en utilisant les EN Numeric Keypad flèches t ou u puis appuer Direct track choice for CD sur la touche OK pour valider FR Pavé numérique votre choix? Choix direct des morceaux du CD...
  • Page 20 Arborescence des menus et options Options and menus arborescence Menüstruktur und Optionen menu e le opzioni REGLAGES / SETTINGS Time settings Time Zone daylight savings Time Source Manual Setup Time format Equalier settings Network settings Network wizard WPS push button Network Profiles Manual setting Current settings...
  • Page 21: Screens

    2.3 Screens The screen shows various menus, dialog screens and displays, as described below. There are six types of screen: o Menu o Splash (mode) o Now playing o Dialog screen o Error/Information o Standby (clock) When text is too long to fit on the screen, it is first shown truncated, then, after a few seconds, slowly scrolls so that you can read it all. The menu screen is the main screen to navigate around the main radio functions and settings. There are ten touch icons on the screen to navigate to: - wireless Aptx to connect smartphones, tablest, PC, MAC or others Bluetooth compatible devices - Internet favorites radios - Internet radio - CD player - FM tuner - My Music - Settings - Auxiliary 1 (analog) - Auxiliary 2 (analog) - Digital coaxial input - Digital optical output...
  • Page 22: Getting Started/Setup

    If you choose No, the next screen asks if you would like to run the wizard next time X-Uni is started. The system then starts without configuring time/date and network settings and enters the Main Menu. Note: If power is removed while the wizard is in progress, the wizard will run again next time X-Uni is started. 3.1.1 Language The next screen to appear will be the Select Language screen. Touch the language you want to select. The default language is English. To change, select Menu > Settings > Miscellaneous Settings > Language > then select your language.
  • Page 23 DAB and FM use time signals broadcast with radio transmissions. Network uses a time signal sent from the Advance Acoustic Internet radio portal when in any network- connected mode. 1. Select Update from DAB, Update from FM, Update from Network or No update. 2. Set your time zone. 3. If your country uses daylight saving, the automatically updated time may be wrong by one hour. When daylight savings are in effect (during the summer), turn on the Daylight savings option. X-Uni will auto-update from the selected source when time information is available. Manual set If you select None, the wizard prompts you to set the time and date and time manually. The day, month and year are displayed and can be set by touching the up or down arrows. After these have been set then click on the arrow in the on the set date screen and after these have been set touch the icon to move to the Set time screen. In the Set time screen the hh:mm are displayed and can be set by touching the up or down arrows.
  • Page 24 3.1.4 Network X-Uni is compatible with all common network protocols and encryption methods, including Wi- Fi Protected Setup (WPS). To connect X-Uni to your network, you need one of the following: o A wired router and an Ethernet (RJ45 network) cable o A Wi-Fi wireless router, together with password key if set Select: WLAN Region Wi-Fi network (SSID) If the network is open (non-encrypted), X-Uni connects without any further ado; see Completion below. Standard encrypted network To enter the network’s key (password), use the Select control to move the cursor through the characters and select. As each character is selected, the key is built up near the top of the display. There are three options accessible by turning Select back before the first characters (0123…) – Backspace, OK and Cancel.
  • Page 25 WPS encrypted network WPS encrypted networks are identified by ‘<WPS>’ at the end of the network name, and have three methods of connection. Select one and follow the prompts: o PIN > (code number) X-Uni generates an 8-digit code number which you enter into the wireless router, access point, or an external registrar (e.g. advanced versions of Windows Vista). o Push button > X-Uni prompts you to press the connect button on the router. It then scans for a ready Push Button Connect network and connects. o No WPS > Enter key as for a standard encrypted network, above. For more information on setting up a WPS encrypted network, see your WPS router’s instructions.
  • Page 26 Completion X-Uni tries to connect to the selected network. If connecting fails, X-Uni returns to a previous screen to try again. If the network connection is lost, X-Uni automatically tries to reconnect.
  • Page 27: Other Settings

    3.2 Other settings 3.2.1 Equaliser Several preset EQ modes are available; also a user-defined setting. To adjust the EQ, select Menu > Settings > Equaliser settings. You can then choose from a variety of preset modes or create your own, with custom bass, treble and loudness settings. 3.2.2 Network X-Uni remembers the last four wireless networks it has connected to, and automatically tries to connect to whichever one of them it can find. You can see the list of registered networks through Menu > Settings > Network settings > Network profiles. From here you can select a network by tapping its entry, or delete a network by tapping the “trash” icon next to its entry. To confirm that you want to delete the network, tap Yes. There are also other options for viewing and manually altering network settings from Menu > System settings > Network (for example setting up a wired network). Users experienced with networking may find these options useful for diagnosing and fixing network problems.
  • Page 28: Internet Radio Portal Registration

    3.3 Internet radio portal registration The Advance Acoustic Internet radio portal website allows you to organise your favourites lists and also listen to Internet radio on a computer. To register your X-Uni with the portal, first get your radio’s unique portal access code by touching the Internet Radio icon from the main menu > Directory icon > Help > Get access code >. Write down the access code. www.wifiradio-frontier.com Visit the portal website at If this is your first visit to the portal, register for a new account, entering the following information: o Access code o Your e-mail address o Password o Radio model (X-Uni) If you already have an account and wish to add an additional radio, log in to your account and select My preferences > Add another Wi-Fi radio. Once your radio is registered with the portal, you can immediately use the Internet radio favourites and added stations features.
  • Page 29: Setting Up A Music Server

    Apple Mac user To connect X-Uni to your Mac, a third–party UPnP server application is required.One of the most popular and easy-to-use is called EyeConnect. This is available from: www.elgato.com. Install EyeConnect to your MAC, open your System Preferences control panel and under “Other”, select EyeConnect. X-Uni must be connected to the same network as your Mac –X-Uni will appear on your EyeConnect devices list. Make sure the “Enable” box next to X-Uni is ticked and that the“Access” drop down menu is set to “Enable New Devices”.Your MAC is now ready to stream to X-Uni. EyeConnect runs in the background, so there’s no need to open the control panel each time you wish to stream. Sharing media with Windows Media Player The most common UPnP server is Windows Media Player (10 or later). Alternatively, other UPnP platforms and servers may be used. To set up WMP for media sharing, perform the following steps: 1. Ensure that the PC is connected to the network. 2. Ensure that the radio is powered on and connected to the same network. 3. In WMP, add to the media library the audio files and folders you want to share with X-Uni (Library > Add to Library…). 4. In WMP, enable media sharing (Library > Media sharing…). X-Uni Make sure that the radio has access to the shared media by selecting it and clicking Allow. You can also set a name for the shared media in Settings… Click OK to close the dialog screens. The PC is now ready to stream the music to the radio. The WMP UPnP service runs in the background; there is no need to start WMP explicitly.
  • Page 30: Internet Radio Mode

    To enter Internet Radio mode touch the Internet Radio icon from the main menu and this will take you to the Internet Radio playing screen. Note: The station list menu is provided from the Internet radio portal, so it is only accessible when X-Uni is connected to the Internet. Station lists and submenus may change from time to time. There are a few ways of selecting stations. Directly from the radio by touching the o Return to playing screen...
  • Page 31: Favourites

    4.2 Favourites Favourites are stored with the Internet radio portal, and are available through all Internet radios registered on the same account. Before favourites can be used, the radio has to be registered with the Internet radio portal. To store a playing station as a favourite, touch the Add to presets icon until the display shows ‘Favourite added’. The station appears in the default favourites list Stations. To select a favourite, touch the Directory icon > My Favourites > Stations > [Favourites list]. 4.3 Browse To browse Internet broadcasts, touch the Directory icon > Stations list > then either Stations > or Podcasts >. Browse through the menus to find broadcasts. Note: BBC radio ‘Listen Again’ programmes are accessible through the Podcast menu, for example Directory icon >...
  • Page 32: Search

    4.4 Search You can also search through Internet broadcasts for stations or podcasts with particular keywords in their title. To search, touch the Directory icon > Stations or Podcasts. Enter a keyword by selecting characters then Search. The search entry screen is similar in operation to the Wi-Fi password entry screen. Select a broadcast from the list. For podcasts, you may be able to select particular episode.
  • Page 33: My Added Stations

    4.5 My added stations Even though the Internet radio portal contains thousands of stations, you may want to listen to stations not listed. You can add your own stations via the portal. These added stations are accessible from X-Uni by touching the Internet Radio icon from the main menu > Directory icon > My Added Stations > [Station]. Now playing information While the stream is playing, the screen shows its name and description. To view further information, touch the information icon. A screen will appear displaying information such as description, metadata, genre, bit rate, codec and sampling rate.
  • Page 34: Music Player Mode (Network And Usb)

    My Music (network and USB) Music player mode plays audio files such as MP3s, AACs, WMAs or FLACs from a computer on the local network or from a USB Flash stick/hard drive. To enter Music player mode, touch the My Music icon on the main menu and the display shows the Select Music Source screen. Once in the Select Music Source screen, touch either Shared Media, USB Playback or My Playlist. If you are already playing a music file, you can press the Directory icon rather than the menu icon to quickly return to the last visited branch of the menu tree. For example, suppose you were listening to the track Heat by the artist 50 Cent through browsing shared media as described in section 5.1 below. Pressing back would return you to the track listing for the album Get Rich or Die Tryin’. Pressing back again would list all 50 Cent albums. Pressing back again would list all album artists, and so on.
  • Page 35: Shared Media (From Upnp Media Server)

    5.1 Shared media (from UPnP media server) Select My Music > Shared media > If you have set up shared media (as described on page 27), you should see an entry consisting of <computer name>: <Shared media name>, for example JB-Laptop: Audio. If you have more than one computer sharing media, the alternatives are listed. Select the shared media you want to play. From this point on, the menus are generated from the shared media server (typically Windows Media Player). The first menu shows a list of media types, for example Music, Video, Pictures and Playlists. X-Uni can only play music and playlists. There is also a search function, which finds tracks in a similar way to Internet radio search. From Music, there are numerous ways of selecting tracks, including: o By Music o By Genre o By Artist o All Music o <Search>...
  • Page 36: Usb Playback

    5.2 USB playback To play audio from a USB mass-storage device such as a USB Flash stick or USB hard drive, USB playback from the Select Music Source screen. 5.2.1 Browsing folders From this point on, menus are generated from the folders on the USB device. Browse folders by touching the directories shown and the scroll bar. The display shows folder and file names (not necessarily track names). Once you have found a track you want to play, touch the name of the track. A short press plays the track immediately. You can also add entire folders to the playlist. X-Uni plays either the selected track or the playlist entered from the music source menu. 5.3 Repeat/shuffle You can repeat tracks or play them in random order by touching the repeat icon or the shuffle icon.
  • Page 37: Now Playing Information

    5.4 Now playing information While a track is playing, the screen shows its track, artist and album if provided, (UPnP) or file name (USB). There is also a progress bar with figures for elapsed and total track time. To view further information, touch the information icon. A screen will appear displaying information such as bit rate, codec and sampling rate. 5.5 My playlist My Playlist is a collection of songs added by the user from either UPnP or USB.
  • Page 38: Dab Radio Mode

    DAB radio mode DAB radio mode receives DAB/DAB+ digital radio and displays information about the station, stream and track playing. To enter DAB radio mode, touch the DAB icon on the main menu screen until the display shows DAB Radio. When entering DAB radio mode, the last-listened to station is automatically selected. 6.1 Scanning for stations 13:00 9 Nov 2009 The first time you select DAB radio mode, or if the station list is empty, X-Uni automatically performs a full scan to see Scanning in progress... what stations are available. You may also need to start a scan manually to update the list of stations for one of the Stations found: 35 following reasons: Cancel o Available stations change from time to time. o If reception was not good for the original scan (for example the antenna was not up), this may result DA B in an empty or incomplete list of available stations. o If you have poor reception of some stations (burbling), you may wish to list only stations with good signal strength.
  • Page 39: Now Playing Information

    6.3 Now playing information While the stream is playing, the screen shows its name and DLS (Dynamic Label Segment) information broadcast by the station giving real-time information such as programme name, track title and contact details. Stereo broadcasts are indicated with an icon at the top of the screen. To view further information, touch the information icon. A screen will appear displaying information such as station ensemble, frequency, error rate, signal strength, codec, bit rate and sampling rate. 6.4 Slideshows Some DAB stations broadcast Slideshows to complement the audio service. The Slideshow can be delivered over the traditional DAB broadcast signal or the Internet. An increasing trend is for broadcasters to deliver Slideshows over the Internet using the RadioVIS application of RadioDNS. RadioVIS Slideshows appear the same as DAB Slideshows, and like DAB Slideshows, they are closely associated with the broadcasted audio service. By default, the network connection is enabled in X-Uni in DAB mode. This enables the radio to retrieve RadioVIS slides automatically, if the station supports RadioVIS. If you disable automatic network connection in DAB mode, RadioVIS slides are not retrieved. If a Slideshow is available, it occupies the full screen by default. You can exit the full-screen Slideshow to view the “Now playing” screen. Examples of slide content include: Station information Show information Current track information Weather Traffic news and camera pictures Advertisements...
  • Page 40: Settings

    To exit a full-screen Slideshow: Touch the screen anywhere. The “Now playing” screen opens, with the Slideshow displayed as a thumbnail in the central left area of the display: To view the full-size slide show from the “Now playing” screen: In the “Now playing” screen, touch the Slideshow thumbnail. The full-screen slide show starts. To enable or disable RadioVIS Slideshows: Select Menu > Network Settings > DAB/FM Network. The Internet connection toggles on or off. Note: RadioVIS Slideshows are enabled by default. 6.5 Settings 6.5.1 Dynamic range compression (DRC) If you are listening to music with a high dynamic range in a noisy environment (for example classical music while cooking), you may wish to compress the audio dynamic range. This makes quiet sounds louder and loud sounds quieter. To change DRC, touch the DAB menu > DRC > then DRC Off, Low or High. 6.5.2 Station order You can choose the order of the DAB station list to be either Alphanumeric, Ensemble or Valid.
  • Page 41: Fm Radio Mode

    FM radio mode FM radio mode receives analogue radio from the FM band and displays RDS (Radio Data System) information about the station and show (where broadcast). To enter FM mode, press the FM icon on the Main menu until the display shows the FM Radio playing screen. 7.1 Selecting stations To find a station, touch the button and you can scan up or down the FM band by pressing the icons. The frequency display starts to run up or down as X-Uni scans the FM band and stops when it finds an FM radio station. It can also be tuned manually by deselecting the icon and pressing the icons. 7.1.1 Presets To store an FM preset, touch the add to presets icon until the display shows the Favourite added screen. Select one of the 10 presets to save the currently playing station. To select a preset, touch the preset icon briefly, then select one of the listed preset stations displayed in My Favourites.
  • Page 42: Slideshows

    7.3 Slideshows Some FM stations broadcast Slideshows to complement the audio service. The Slideshow can be delivered over the traditional FM broadcast signal or the Internet. An increasing trend is for broadcasters to deliver Slideshows over the Internet using the RadioVIS application of RadioDNS. RadioVIS Slideshows appear the same as FM Slideshows, and like FM Slideshows, they are closely associated with the broadcasted audio service. By default, the network connection is enabled in X-Uni in FM mode. This enables the radio to retrieve RadioVIS slides automatically, if the station supports RadioVIS. If you disable automatic network connection in FM mode, RadioVIS slides are not retrieved. If a slide show is available, it occupies the full screen by default. You can exit the full-screen slide show to view the “Now playing” screen. Note: X-Uni supports RadioVIS in FM mode only in the following countries: United Kingdom, Germany, Switzerland, France, Italy, Sweden, Denmark, Australia, United States of America. Examples of slide content include: Station information Show information Current track information Weather Traffic news and camera pictures Advertisements To exit a full-screen slide show: Touch the screen anywhere. The “Now playing” screen opens, with the slide show displayed as a thumbnail in the central left area of the display: To view the full-size slide show from the “Now playing” screen: In the “Now playing” screen, touch the slide show thumbnail. The full-screen slide show starts. To enable or disable RadioVIS slide shows: Select Menu > Network Settings > DAB/FM Network. The Internet connection toggles on or off. Note: RadioVIS slide shows are enabled by default.
  • Page 43: Settings

    7.4 Settings 9.4.1 Scan settings By default, FM scans stop at any available station. This may result in a poor signal-to-noise ratio (hiss) from weak stations. To change the scan settings to stop only at stations with good signal strength, change the Stop on stations value from All to Strong via the FM menu. 7.4.2 Audio settings By default, all stereo stations are reproduced in stereo. For weak stations, this may result in a poor signal-to-noise ratio (hiss). To play weak stations in mono, touch the FM menu bar > Force mono > Yes.
  • Page 44: Auxiliary 1, Auxiliary 2, Digital Coaxial And Digital Optical Inputs

    Aux 1 input mode Aux 1 input mode plays audio from an external stereo source To play audio with Aux 1 in mode, 1. Connect the external audio source to the Aux 1 RCA input 2. Touch the AUX1 icon on the main menu display until the display shows Auxiliary input on the screen. 3. Play your Aux. device Aux 2 input mode Aux 1 input mode plays audio from an external stereo source To play audio with Aux 2 in mode, 1. Connect the external audio source to the Aux 1 RCA input 2. Touch the AUX2 icon on the main menu display until the display shows Auxiliary input on the screen. 3. Play your Aux. device Digital coaxial input mode Digital coaxial input mode plays audio from an external stereo digital output RCA coaxial To play audio with Digital coaxial input in mode, 1. Connect the external audio source to the digital coaxial RCA input 2. Touch the Digital coaxial input icon on the main menu display until the display shows Digital coaxial input on the screen. 3. Play your Digital device Digital optical input mode Digital optical input mode plays audio from an external stereo digital source output (optical) To play audio with Digital optical input mode,...
  • Page 45: Wireless Bt / Bluetooth Aptx Compatible Input

    9 Wireless Airblue Bluetooth Aptx compatible input 1. Touch the Wireless BT icon on the main menu display until the display shows this input. 2. Go to the Bluetooth Manager of your iPhone, iPod touch, iPad, tablet, smart phone, PC or MAC computer, then go on the bluetooth settings. You will see a new bluetooth connection under ADVANCE ACOUSTIC or X-Uni name. Confirm that you choose it, after few seconds, your audio device is pairing with the X-Uni. If you move out of range or turn off the Bluetooth feature on your audio device, the Bluetooth Music Receiver will disconnect from your device. To reconnect, simply access the Bluetooth Manager on your device and select the ADVANCE ACOUSTIC or X-Uni connection. 10 CD player DISC SLOT A disc slot located in the center of the X-CD3 accepts the disc and pulls it into the disc transport. Insert the disc label-side up and properly centered . After the disc is loaded the display shows tracks or time. (Display button of the IR remote control). To eject the disc, press button. MULTI FUNCTION BUTTON: PLAY/PAUSE If you push this button when your cd is playing, you will interrupt the track, if you push again, then your cd will play. NEXT / NEXT TRACK Press this button to go to the next track. You also can press several times this but ton in order to jump to all next track of your disc. PREVIOUS / PREVIOUS TRACK Press this button to go to the previous track. You also can press several times this button in order to jump to all previous track of your disc. STOP During playback, each time you press this button, the fast forward function will swit ch on.
  • Page 46: Settings

    DISPLAY FUNCTION SINGLE REPEAT AND REPEAT ALL FUNCTIONS A-B REPEAT FUNCTION 10 Settings The settings icon on the main menu takes you to the main radio settings providing a centralised and convenient way to configure all the radio settings. The settings are arranged into the following categories: Time settings Equaliser settings Network settings Miscellaneous settings 10.1.1 Time settings A range of time settings are available; which include the functionality to set: Time zone Use daylight savings time Setting the time source. E.g. None, Internet, DAB, or FM-RDS Manual time set-up...
  • Page 47 10.1.2 Equaliser settings Several preset EQ modes are available; also a user-defined setting. To adjust the EQ, select Menu >Settings > Equaliser Settings. You can then choose from a variety of preset modes or create your own, with custom bass, treble and loudness settings. 10.1.3 Network settings X-Uni remembers the last four wireless networks it has connected to, and automatically tries to connect to whichever one of them it can find. You can see the list of registered networks through Menu > Settings Menu > Network Settings > Network profiles. From here you can delete unwanted networks by pressing the trash icon then confirming the delete. There are also other options for viewing and manually altering network settings from Menu > System settings > Network settings > Manual settings (for example setting up a wired network). Users experienced with networking may find these options useful for diagnosing and fixing network problems. 10.1.4 Language The default language is English. To change, Settings Menu >...
  • Page 48: Software Upgrade And Factory Reset

    CAUTION: Before starting a software upgrade, ensure that X-Uni is plugged into a stable mains power connection. Disconnecting power during a software update may permanently damage the unit. To turn automatic checking on or off, touch the Settings menu icon > Miscellaneous Settings > Software update > then set it to Enabled.
  • Page 49 NOTES...
  • Page 50 NOTES...
  • Page 51 SPECIFICATIONS OUTPUT LEVEL FREQUENCY RESPONSE (-3dB) 10Hz – 45 kHz DISTORSION < 0.1% IMPEDANCE 10K Ω S/N RATIO ≤ 80 dB CHANNEL SEPARATION ≥ 80 dB CONVERTER 24bit-192kHz IN LEVEL (AUX) ≥ 300mV AC INPUT 115V-230V POWER CONSUMPTION MAX <30W STAND BY <...
  • Page 52 Design and development in France by Advance Paris Sarl 13 rue du coq gaulois - 77390 Brie Comte Robert - FRANCE Tel. +33 (0) 160 185 900 - Fax +33 (0) 160 185 895 email: info@advance-acoustic.com www.advance-acoustic.com...

Table of Contents