Page 1
Pro and All Seasons PURSUIT SERIES 6 POSITION BABY CARRIER INSTRUCTION MANUAL...
Page 2
IMPORTANT! KEEP INSTRUCTIONS FOR FUTURE REFERENCE AND USE. FALL HAZARD - Infants can fall through a wide leg opening or out of carrier. Adjust leg openings to fit baby’s legs snugly. Before each use, make sure all fasteners are secure. Take special care when leaning or walking.
SAFETY INFORMATION TABLE OF CONTENTS Baby’s chin should NEVER rest on baby’s chest because this partially closes baby’s airway which could lead to suffocation. Always ensure there is sufficient room around baby’s face to provide a clear source of air. Check that there are at least two fingers clearance under baby’s chin. Check baby’s position regularly to make sure baby is properly seated in the carrier with head upright and not slumping Getting Started: downward or to the side.
FRONT FETAL CARRY Minimum 7 lbs (3.18 kg) up to 4 months Maximum 45 lbs (20 kg) (Sold Separately) REMOVING BABY FROM CARRIER ALWAYS USE NECK SUPPORT FOR BABIES WHO DON’T HAVE NECK CONTROL (0-4 months) * Optional LÍLLÉbaby® Infant Pillow sold separately...
FRONT INFANT CARRY Minimum 7 lbs (3.18 kg) Maximum 45 lbs (20 kg) REMOVING BABY FROM CARRIER ALWAYS USE NECK SUPPORT FOR BABIES WHO DON’T HAVE NECK CONTROL (0-4 months)
FRONT OUTWARD-FACING CARRY Minimum 6 months Maximum 45 lbs (20 kg) Child must face towards you until child can hold head upright. REMOVING BABY FROM CARRIER...
ENGAGING THE NECK SUPPORT CARE INSTRUCTIONS 0 - 4 months Machine Wash Cold. Do Not Bleach. Tumble Dry Low. Do Not Iron. Do Not Dryclean. Before washing, fasten all buckles. Wash on cold with mild detergent without optical brighteners. Do not bleach, iron, or dry clean. For best results hang to dry. WARRANTY AND DISCLAIMER WARRANTY and DISCLAIMER: LÍLLÉbaby®...
Page 13
LÍLLÉbaby® 700 12th Street, Suite 220 Golden, CO 80401, USA (855) 554-5531 CustomerService@lillebaby.com Item: LÍLLÉbaby® PURSUIT Baby Carrier. www.LILLEbaby.com Made in China. Patents No. 8,172,116, US 8,424,732, US 8,701,949 and US D693,569 Complies with ASTM F2236-16a and CEN/TR 16512:2015...
Need help?
Do you have a question about the PURSUIT SERIES and is the answer not in the manual?
Questions and answers