Connect To And Disconnect Ptt; Make And Receive A Ptt Call - Nokia 7360 User Manual

P u s h t o t a l k
To set the PTT settings for use, select
To set the required settings for the PTT connection, select
settings.
To open the browser and to connect to the PTT network portal provided
by the service provider, select Web.

■ Connect to and disconnect PTT

To connect to the PTT service, select
on. indicates the PTT connection.
temporarily unavailable. The phone automatically tries to reconnect to
the service until you disconnect from the PTT service. If you have added
groups to the phone, you are automatically joined to the active
or Listened) groups, and the name of the default group is displayed in
the standby mode.
To disconnect from the PTT service, select

■ Make and receive a PTT call

Select Menu > Settings
to use the loudspeaker or headset for PTT communication.
Warning: Do not hold the device near your ear when the loudspeaker is
in use, because the volume may be extremely loud.
When connected to the PTT service, you can make or receive dial-out
calls, group calls, or one-to-one calls. One-to-one calls are calls you
make to only one person.
Make a dial-out PTT call
For a dial-out PTT call you can select multiple PTT contacts from the
contact list. The recipients get an incoming call and need to accept the
call in order to participate. A dial-out call creates a temporary group,
and the participants join this group only for the duration of the call.
After the call, the temporary dial-out group is deleted.
Select Menu > Push to talk
contacts for the dial-out call.
72
PTT settings.
Menu
indicates that the service is
Switch PTT
> Tones > Push to talk settings
> Contacts list, and mark the desired
Config.
> Push to talk > Switch PTT
off.
to set the phone
(Default