FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 3
Remote Camera Control: QUICK START GUIDE 1. You should charge your Nuband for 1-2 hours prior to use. Remove module as diagram shown below and plug into USB charge socket in either a computer or a USB plug. The indicating light flash when it is being charged.
Page 4
2. Install Free App: Go to App store or Play store, download this App: “Nuband Flash HR” and install it. To use the App, make sure your mobile device is connected to the Internet via Wi-Fi or 3G/4G. 3. Account Set-up: Open the “Nuband Flash HR” App. Set your personal information to start.
Page 5
Touch Screen Function Operation Hold finger on the screen for 10 seconds. 0000 a code will apper. This is your Nuband i-Touch Starting-up code. Note and use when binding device. Light up Touch the screen or turn the wrist over.
Page 6
Function Operation :Running/walking, :Yoga, :Rope Jump, :Basketball, :Cycling. Swipe to the above modes, press and hold until the smartband vibrates Confirm once to select the sport. The sport icon will flash when the chosen sport sport mode mode is activated. (Different sports can be chosen from the App.
Page 7
Landscape Display Using Nuband i-Touch in Wet Condition Nuband i-Touch is splash-proof. Nuband i-Touch is NOT fully water resistant. Please DO NOT wear it in the shower or bath. Please remove the band before participating in any aquatic sports. - 6 -...
Page 8
5. Pairing Keep your phone with Bluetooth and WiFi “on” for this step. Keep the screen lit and your Nuband i-Touch will show a radar icon Login to the App 【Device】 to Tap the band ID icon for pair. If pair success, press “PAIR”...
Page 9
Please keep the screen of the band on during the searching process. Please connect the band and the App via the App “Nuband Flash HR” instead of the When successfully connected, a phone Bluetooth. If the connection is only Bluetooth icon...
Page 10
After successful connection, the “Device” page will show the connected band sync time and the battery level of the band. To review the device state or modify your band settings, click “Device Setting” . -9 -...
Page 11
6. SYNC Data The band will SYNC data automatically after being connected with phone by the Nuband Flash HR App. The time and date/day of the band will be calibrated to the same as the phone. SYNC data includes: steps, calories and distance.
Page 12
7. Sleep Monitor Enter Sleep Mode: Swipe to the function interface , tap to and hold finger on screen until shows and band vibrates. Swipe to the time display interface, if the icon appears along with the time, , sleep mode is activated.
Page 13
10. Sedentary Reminder Sedentary Reminder can be set in device state of the App, and time quantum can be set in the Time period setting. (“Device” “Device Setting” “Sedentary Reminder”) The time setting should match your daily routine, like 9:00a.m.-5:00p.m. instead of 9:00p.m.-5:00a.m., so it can function properly.
Page 14
11. Alarm Clock Add alarm by entering the “Alarm Setting” under device state. (“Device” “Device Setting” “Alarm Setting”) Press “Add” on the top right corner to add or edit an alarm. Up to six different alarms can be set. When it comes to the programmed time, the band will vibrate and will be displayed.
Page 15
12. Camera Remote Control Activate the camera under Device state. Press “Camera” entry camera remote control. The band will show Icon, photos can be taken by pressing the screen of the band. SMC HK 2:42 PM Back Camera - 14 -...
IOS users: Go to Settings of iPhone and search for the “Nuband Flash HR” App. In “Notifications”, make sure “Allow notifications” is turned on. Android users: On the App - Check if all notification items are allowed in Message Push.
Page 17
14. Sport Type Setup Set up sports type in App in two ways. 1. “Activity“ “ “ “Sport Type” - 16 -...
Page 19
2. “Device” “Target” “ “ “Sport Type” Different sports can be chosen from the App. Walking is the default setting. Up to four additional sports can be added and monitored. - 18 -...
Page 21
15. Firmware Upgrade Attention: The phone screen must kept lit when using this function. When the band and the App is connected for the first time, please check if the firmware is updated to the latest version. Update can be completed in device (“Device”...
Page 22
Checking the New Firmware Availability Go to “Device” tab, click on the “Device Setting” you will find the “Firmware Version”. Click on the “Firmware Version” to check if there is a new version. Follow the steps: Please continue onto the next page. -21 -...
Page 24
If the device failed during the upgrading process, please restart the upgrade process again by clicking the “Firmware Aid” and follow the below steps: (Firmware aid can update under a disconnected status) Please continue onto the next page. -23 -...
Page 26
Android : After connected the activity tracker with the app, please allow “Nuband Flash HR” to enable calls, SMS, contacts and keep “Nuband Flash HR” running in background. If there are security software on your phone, set up the software “Nuband Flash HR”...
Page 27
When returning product under warranty, item must be returned along with original packaging and retailer receipt. Without the receipt, the warranty will be considered invalid. It is your responsibility to back any data up. If in repair or replacement, goal data is lost Nuband claim no responsibility for this.
Page 28
Nuband is a device developed to assist monitoring aspects of your health but should never replace the professional advice of your Doctor or Physician. Nuband are not a licensed medical conditions or any kind, or determining the effect of any specific exercise on a medical condition.
Page 29
Because of possible loss, we recommend insuring your Nuband, return receipt requested, when using the mail. If you do not obtain the proper receipt within a reasonable time, start a tracer through the originating post office. Please allow 2 to 3 weeks from the date we receive your package for your replacement Nuband to arrive.
Need help?
Do you have a question about the i-Touch NU-G0018 and is the answer not in the manual?
Questions and answers