Advertisement
STICK-DE3
Sunlite Touch Sensitive Intelligent Control Keypad
Key Features
• Sleek glass design which sits 11mm from the wall
• Graphical color display to show selected environment
• Color/dimmer/speed palette
• Color temperature mixing
• Touch sensitive buttons. No mechanical parts
• Touch sensitive wheel allows for accurate color selection
• Multi-zone microSD memory
• Multi-room control with 500 scenes, 10 zones
• 1024 DMX channels. Control 340 RGB fixtures
• USB & Ethernet connectivity for programming and control
• RS232, Dry Contact Ports and an Infra Red input port
• Clock and calendar with Sunrise/Sunset triggering
• Network communication. Control lighting remotely
• Catalog of designs including black and white glass
• OEM customization of the color palette and logo
• Windows/Mac software to set dynamic colors/effects
• iPhone/iPad/Android remote and programming apps
Optional Accessories
RJ2BLOCK
RJ45 to connector block converter for power+DMX
POWER4M
6-7v ACDC power supply
© Nicolaudie-Sunlite 1989-2017. All rights reserved. We reserve the right without notice to amend the technical information and specifications.
Overview
The feature rich lighting controller has been
designed to provide a control solution for the
most demanding of projects, whilst maintaining
an easy to use panel of touch sensitive
buttons. The controller integrates a graphical
color screen allowing scene photos to be
displayed. Easily view the selected zone, scene
name and design without the need to navigate
through complex menus. Change the speed,
color and dimmer using the circular palette.
The lighting levels, color and effects can be
programmed from a PC, Mac, Android, iPad or
iPhone using the included software.
http://www.nicolaudie.com/stick-de3.htm
Technical Data
Input Power
Output Protocol
Programmability
Available Colors
Connections
Memory
Temperature
Mounting
Dimentions
Weight
Standards
6-7V DC 0.6A
DMX512 (x2)
PC, Mac, Tablet,
Smartphone
Black / White
USB, Ethernet,
RS232, Clock, 8 dry
contact ports, 5v Out-
put Relay
microSD (32Gb Max)
-10 °C - 45 °C
Single or double gang
wall socket
146x106x11mm
247g
EC, EMC, ROHS, ETL
Advertisement
Table of Contents
Related Manuals for Nicolaudie STICK-DE3
Summary of Contents for Nicolaudie STICK-DE3
- Page 1 • iPhone/iPad/Android remote and programming apps Standards EC, EMC, ROHS, ETL Optional Accessories RJ2BLOCK RJ45 to connector block converter for power+DMX POWER4M 6-7v ACDC power supply © Nicolaudie-Sunlite 1989-2017. All rights reserved. We reserve the right without notice to amend the technical information and specifications.
-
Page 2: Easy Installation
FCI ref: 77313-101-20LF HARWIN ref: M20-9981046 SAMTEC ref: TSW-110-xx-T-D FARNELL ref: 1841232 RS ref: 763-6754 673-7534 251-8165 MOUSER ref: 538-10-89-7202 DIGIKEY ref: WM26820-ND © Nicolaudie-Sunlite 1989-2016. All rights reserved. We reserve the right without notice to amend the technical information and specifications. -
Page 3: Network Control
IP address and subnet mask can be set using the Hardware Manager • If the network has a firewall enabled, allow ports 2430 and 2431 © Nicolaudie-Sunlite 1989-2016. All rights reserved. We reserve the right without notice to amend the technical information and specifications. -
Page 4: Setting Up The Controller
4. Slide the replacement battery in from the top, making sure the positive side is facing up. 5. Replace the back panel by pushing it up into place. © Nicolaudie-Sunlite 1989-2016. All rights reserved. We reserve the right without notice to amend the technical information and specifications. -
Page 5: Internal Menu
Enable NTP : enables Network Time Protocol. The controller will synchornise the clock with the internet if a connection is evailable © Nicolaudie-Sunlite 1989-2016. All rights reserved. We reserve the right without notice to amend the technical information and specifications. - Page 6 About : check the firmware release date and version number and assign a name for the controller Reset : Reset all settings to the factory default © Nicolaudie-Sunlite 1989-2016. All rights reserved. We reserve the right without notice to amend the technical information and specifications.
-
Page 7: Troubleshooting
- Connect by USB and open the Hardware Manager (found in the software directory). If it’s detected here, try to update the firmware © Nicolaudie-Sunlite 1989-2016. All rights reserved. We reserve the right without notice to amend the technical information and specifications.
Need help?
Do you have a question about the STICK-DE3 and is the answer not in the manual?
Questions and answers
Good morning We have a Stick 3 system which is connected to 12 LED strips and we have noticed a slight flicker on all of the LED strips. I can't see anything in the manual to troubleshoot this. Wondering if you know what the problem may be? Thanks
The flicker in the LED strips connected to the Nicolaudie STICK-DE3 system could be caused by several factors:
1. SD Card Issues – The SD card may not be formatted correctly. Try formatting it to FAT16 or FAT32.
2. Show File Corruption – The show file may be corrupted. Re-write the show file and check if the issue persists.
3. DMX Signal Issues – The DMX LED should flicker to the right of the SD card. If it is not flickering correctly, there may be a problem with the DMX signal.
4. Hardware Connection Issues – Connect the controller to a computer, open the Hardware Manager, and check the DMX Input/Output tab. Move the faders to see if the fixtures respond correctly.
5. Faulty SD Memory Card – Try replacing the SD card with a new one to rule out memory card failure.
If none of these steps resolve the flicker, the issue may be related to external factors such as power supply instability or interference in the DMX signal chain.
This answer is automatically generated