Summary of Contents for Syscan LiveTrack Reader Version 2
- Page 1 LiveTrack Reader Version 2 User Manual June, 2006 Syscan International Inc, Montreal...
- Page 2 INFORMATION TO USER This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for Class A Digital Device, pursuant to Part 15 of the FCC Rules.
-
Page 3: Table Of Contents
QUICK START GUIDE .................................4 NOMENCLATURE ................................5 ..............................5 EADER ........................6 HARGE ERIAL CONNECTOR LED I ............................7 NDICATORS ............................8 CREEN MENU .............................. 9 NFO MENU ............................. 10 DVANCED MENU ............................12 UTPUT MENU ............................13 THER SCREENS COMMUNICATIONS ................................14 .......................... -
Page 4: Quick Start Guide
Batt:Chrg Batt: 7.85 Volts Batt:Full 4- Turn on the reader by pressing the on/off button. Syscan.com 5- Read tag. H 982 000 01923 6104 *** IMPORTANT THE POWER SUPPLY IS TO BE USE TO RECHARGE THE BATTERY AND NOT TO RUN THE READER. -
Page 5: Nomenclature
Nomenclature Reader RFID reading zone Display screen LED’s ON/OFF Button Charge/Serial connector Handle/Battery compartment Battery door LiveTrack Reader – User Manual. Page: 5 / 16... -
Page 6: Charge/Serial Connector
Charge/Serial connector Pin 1: 12 VDC in Pin 2: RS-232 TX data to pc Pin 3: RS-232 Rx data from pc Pin 4: GND Pin 5: Cable in detect. Shut down the Bluetooth circuit when serial cable is inserted. LiveTrack Reader – User Manual. Page: 6 / 16... -
Page 7: Led Indicators
LED Indicators Bluetooth LED RFID LED Power LED Bluetooth LED: Blinks every 3 seconds: the Bluetooth circuit is on. On steady: the Bluetooth connection is established. Off: the Bluetooth circuit is off. RFID LED: On: the RFID circuit is on and ready to read. Off: the RFID circuit is off. -
Page 8: Screen Menu
Screen menu Syscan.com Turn on the reader by pressing the on/off button. The “X” screen will appear or the tag number X XXX XXX H 982 000 if you already read a tag. (Example for ISO XXXXX XXXX 01923 6104... -
Page 9: Info Menu
Info menu Batt: Entering the info menu will display the battery screen. 7.85 Volts F60- Press the on/off button one time to display the serial number screen. LTL00999 VF04.06 Press the on/off button one time to display the firmware version screen. 2006-05-31 Tags Press the on/off button one time to display... -
Page 10: Advanced Menu
Advanced menu Entering the advanced menu will display the Start a Loading start a download screen. Press and hold the on/off button for 2 sec. to start the Download Completed download. Press the on/off button one time to display Erase Memory the erase memory screen. - Page 11 Press the on/off button one time to display Language Language the language screen. Press and hold the English * English on/off button for 2 sec. for the star to appear. Press the on/off button to change the Language Langage language. Press and hold the on/off button French Francais for 2 sec.
-
Page 12: Output Menu
Output menu Entering the output menu will display the tag Tag Type Tag Type type screen. Press and hold the on/off button for 2 sec. to toggle from yes and no. Tag ID Tag ID Press the on/off button one time to display the tag ID screen. -
Page 13: Other Screens
Other screens Batt:Chrg The power supply is connected and the battery is charging. 7.85 Volts Batt: The power supply is connected and the battery is fully charged. Batt:Full The battery has stopped charging because the temperature exceeds 60 degree Celsius. Batt:Hot The battery has stopped charging because the temperature is lower than 3 degree... -
Page 14: Communications
Communications Bluetooth circuit The Bluetooth reader operates as a slave device. Please refer to your master device manual to establish the pairing. The reader does not need a PIN authentication. If your master device needs a PIN authentication, use “default”. Your master device should provide a COM port after pairing the two devices. -
Page 15: Packet Description
Packet description When an RFID Tag is read, the tag, date, time and site # will be saved in the reader’s memory and will be transmitted via Bluetooth or serial communication. When a read occurs, the format of the packet being sent by the reader is as follows: FCCCDDDDDDDDDDDDAASSMMHHWWDDMMYYTTTTTTT‘CR’... -
Page 16: Specifications
Specifications Operating Frequency: 134.2 KHz RFID Compatibility: ISO HDX, ISO FDX-B and Industrial HDX Reading Distance: 25-30 cm (with ISO HDX tags) Memory: 10 000 tags Communication Ports: Bluetooth © Class 1 and Serial (RS-232 9600,n,8,1) Bluetooth: Class 1 (100 m) Battery Power: 7.4 V Li-ion Rechargeable More than 6 hours of continual use...
Need help?
Do you have a question about the LiveTrack Reader Version 2 and is the answer not in the manual?
Questions and answers