Attaching/Removing The Lens Hood - Leica Q2 Instruction Manual

ATTACHING/REMOVING THE LENS HOOD

This camera comes with a matching lens hood. It is pre-mounted
ex works.
The use of the lens hood is recommended to reduce vignetting.
REMOVAL
▸ Unscrew the lens hood in counter-clockwise direction
▸ Screw on the thread protection ring
ATTACHING
▸ Unscrew the thread protection ring in counter-clockwise
direction (Fig, 1)
▸ Screw on the lens hood in clockwise direction to the stop
(Fig. 2)
Notes
• The lens hood cover supplied will only fi t the lens hood and
cannot be used as lens cover on its own.
• A matching lens front cap E49 (Order No. 14001) is available as
an optional accessory for use of the camera without a lens
hood: https://store.leica-camera.com
EN
31