Care & Cleaning - Espresso Machine
The espresso making process involves
extracting oils out of coffee grinds. Deposits
of grinds & oils build up over time, affecting
the taste of the coffee & operation of the
Espresso Machine.
Purging water through the Group Head &
Steam Wand, before & after making each
coffee, is the easiest way to keep your
Espresso Machine clean.
(See Coffee Making Guide pages 10-13)
Cleaning Accessories & Removable Parts
- Clean parts in warm water with a mild
detergent, rinse & dry.
Note: Do not use alkaline cleaning
agents, abrasives or metal scourers, as
these will scratch the surfaces of parts.
Dishwasher Safe parts:
- Stainless Steel Milk Jug
- Stainless Steel Drip Tray Grill
- Stainless Steel One Cup Filter Basket
- Stainless Steel Two Cup Filter Basket
- Cleaning Disc
Dishwasher Safe TOP SHELF ONLY parts:
- Hardened Stainless Steel Top Burr
- Grind Bin
NON Dishwasher Safe parts:
- Water Reservoir
- Group Handle
- Bean Hopper
- Drip Tray
- Tamper
- Cleaning Pin
- Cleaning Brush
Cleaning Warming Plate & Exterior
• When Required
Wipe over the machine with a soft damp
cloth with a mild detergent and wipe dry.
CAUTION: To prevent damage to the
appliance do not use alkaline cleaning
agents, abrasives or metal scourers.
WARNING: Do not immerse the machine
in water.
24
Cleaning Drip Tray & Grind Bin
• When Required
Empty if the red Water Level Indicator
appears through the Stainless Steel Grill,
otherwise water will overflow.
Note: Over time it is normal for the
inside of the Drip Tray & Grind Bin to be
stained by the oils in the coffee grinds.
• Weekly
Clean in warm water with a mild detergent,
rinse & dry.
Cleaning Group Handle & Filter Basket
• Every Time
Wash after each use by rinsing them
with warm water under the tap.
• Regular Intervals
In warm soapy water using a mild
detergent, rinse & dry.
Cleaning Shower & Group Head
• Every Time
Run water through before making
an espresso.
(See Coffee Making Guide pages 10)
• Weekly
- Purge water through the Group head by
pressing the ONE CUP BUTTON.
- Allow water to run through until it stops.
- With the Cleaning Brush remove any
coffee grinds from around the Group
Head inside rim and Silicone Seal. Wipe
the Shower Head with a damp cloth.
SHOWER
HEAD
SILICONE
SEAL
GROUP HEAD
INSIDE RIM
Cleaning Tablet
Sunbeam Espresso Machine Cleaning
Tablets (EM0020) are available for purchase
from Sunbeam. Details are on the
back page.
Need help?
Do you have a question about the BARISTA MAX EM5300 and is the answer not in the manual?
Questions and answers
My seam wand won't work and the steam light flashes the moment the machine is turned on. Barista max expresso machine EM5300
The steam wand on the Sunbeam Barista Max EM5300 may not be working due to several possible causes:
1. Steam Wand Tip is blocked – Check the Care & Cleaning section to clean the tip.
2. No water in the reservoir – Ensure the water reservoir is filled and run hot water through the steam wand.
3. Scale buildup in the espresso machine – Perform a descaling cycle as described in the manual.
If the steam light is flashing, it indicates that the machine is not ready to steam. Ensure the machine is fully heated before use.
This answer is automatically generated