Gree VERSATI III Series Service Manual page 53

[Notes]：
● It can be performed only when the unit is turned off.
3.2.2.16 WiFi Reset
[Operation Instructions]
★At the function setting page, by touching ―WiFi‖, a choice box will pop up, where by touching ―OK‖ , the
WiFi setting will be reset, and by touching ―Cancel‖ the choice box will quit and WiFi will not be reset.
3.2.2.17 Reset
[Operation Instructions]
★At the function setting page, by touching ―Reset‖, a choice box will pop up, where by touching ―OK‖ all
user parameter settings will be reset and by touching ―Cancel‖ it will back to the function setting page.
[Notes]：
● This function is allowed only when the unit has turned off.
● This function is valid for ―Temp. timer‖, ―Clock timer‖, ―Preset mode‖, ―Weekly timer‖, and ―Weather
depend‖.
3.2.3 User Parameter Setting
[Operation Instructions]
★1. At the menu page, by touching ―PARAMETER‖, it will back to the parameter setting page, as shown
in the figure below.
★2. At the menu setting page, by touching the page turning keys, it is able to switch to the page where
the desired parameter is.
★3. After that, this setting will be saved by touching ―OK‖ and then the unit will run based on this setting.
While this setting will give up by touching ―Cancel‖.
[Notes]：
● For parameters with different defaults under different conditions, when conditions changes, the
Unit Control
Parameter Setting Page