PLEASE READ BEFORE RETURNING THIS PRODUCT FOR ANY REASON. If you have a question or experience a problem with your BLACK+DECKER purchase, go to www.blackanddecker.com/instantanswers If you can’t find the answer or do not have access to the Internet, call 844-299-0879 from 10:30 a.m.
Before You Call For Service ..............................25 Customer Service..................................25 Troubleshooting..................................25 Limited Warranty ..................................25 PRODUCT REGISTRATION Thank you for purchasing our _____________________________ BLACK+DECKER product. This Model number easy-to-use manual will guide you _____________________________ in getting the best use of your Serial number product.
SAFETY INFORMATION DANGER WARNING CAUTION DANGER - Immediate hazards WARNING - Hazards or unsafe CAUTION - Hazards or unsafe which WILL result in severe practices which COULD result in practices which COULD result in personal injury or death severe personal injury or death minor personal injury IMPORTANT SAFETY INSTRUCTIONS WARNING...
SAFETY INFORMATION 13. Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for 2 weeks or more, before using a washer or combination washer-dryer, turn on all hot water faucets and let the water flow from each for several minutes.
SAFETY INFORMATION INSTALLATION WARNINGS AND PRECAUTIONS Plug the power cord into an AC 120V/60Hz wall socket rated at 15amps or higher. Use the socket for this washer only. 2. Do not use an extension cord. - Sharing a wall socket with other appliance, using a power strip, or extending the power cord may result in electric shock or fire.
SAFETY INFORMATION 15. If the washer is moved to a new location, have it checked and re-installed by a qualified service technician. - Failing to follow this warning may result in electric shock or fire. 16. Do not install on carpet. Install washer on a level and solid floor that can support its weight.
Page 8
SAFETY INFORMATION USAGE AND MAINTENANCE WARNINGS If the appliance is flooded, cut the power immediately and contact your nearest service center. 2. If the appliance emits a strange noise, a burning smell, or smoke, unplug the power plug immediately and contact your nearest service center. - Failing to do so may result in electric shock or fire.
Page 9
SAFETY INFORMATION 13. Do not attempt to repair, disassemble, or modify the appliance yourself. - Do not use any fuse (such as cooper, steel wire, etc.) other than the standard fuse. - If you need to repair or reinstall the appliance, contact your nearest service center.
Page 10
SAFETY INFORMATION USAGE AND MAINTENANCE CAUTIONS Unplug the power plug when the appliance is not being used for long periods of time or during a thunder/lightning storm. - Failing to do so may result in electric shock or fire. 2. Keep hands and foreign objects clear of the lid and latch area when closing the lid.
Page 11
SAFETY INFORMATION 14. Do not spray volatile material such as insecticide onto the surface of the appliance. - As well as being harmful to humans, it may also result in electric shock, fire, or problems with the product. 15. Do not place an object that generates an electromagnetic field near the washer. - This may result in injury due to a malfunction.
Page 12
SAFETY INFORMATION UNPACKING AND REMOVING SHIPPING MATERIAL Remove the packing box and lift the washer up and away from the foam base cushion. Open the lid of washer to take out all accessories including protection foam. Foam base cushion Protection foam Packaging materials can be dangerous to children;...
SET UP & USE PARTS & FEATURES Top lid Control panel Adjustable Legs Top lid Cold water inlet Power cord wrap Drain hose Power cord Pump filter Rollers Page 13...
SET UP & USE CHOOSE THE PROPER LOCATION FLOORING For best performance, you must install your washer on a solidly constructed floor. Wood floors may need to be reinforced to minimize vibration and/or unbalanced load situations. - Carpeting and soft tile surfaces are contributing factors to vibration which can cause your washer to move slightly during the spin cycle.
Page 16
SET UP & USE CHOOSE THE PROPER LOCATION WATER To correctly fill your washer in the proper amount of time, water pressure of 14 to 70psi (100 to 500 kPa) is required. Water pressure less than 14psi may cause water valve failure, or may not allow the water valve to shot off completely, or may extend the fill time beyond what your washer controls allow, causing your washer to turn off and alarm error.
Page 17
SET UP & USE Step 2: Install the Bottom Cover Slide the bottom cover into the slots on bottom surface of the unit as in the following figure, and fix it with two Bottom Cover screws attached with the unit. Step 3: Connect the water hose TEMPORARY CONNECTION •...
Page 18
Rubber gasket Pull down on the white ring Rubber gasket Inner threads for o to divide the adaptor into SET UP & USE two parts. Pull down on the white ring Top part: Faucet fitting Inner threads for outer threaded faucet. to divide the adaptor into Bottom part: Hose fitting two parts.
Page 19
SET UP & USE Step 5: Leveling your washer Pulsator See if the washer is level by checking the position of the tub or using a leveling gauge. 1. Slide the washer into position. 2. Open the lid of the washer, and pour the water into the tub to just below the pulsator level.
SET UP & USE CONTROL PANEL 3----large preset 2----medium Remain min/times (min) Program 1----small ON/OFF Start/Pause Spin Load Size Wash Rinse 1. Program Press this button to select your desired washing program. Heavy (light) Rapid (light) Gentle (light) Soak (light) Normal (light) 2.
Page 21
SET UP & USE WARNING To reduce the risk of electric shock, or injury to persons, read the important safety instructions before operating this appliance. WASHING A LOAD OF LAUNDRY Operate with cold water only. Step 1: Power on your washer Press the ON/OFF button to power your wash on.
Page 22
SET UP & USE Step 4: Select your desired cycle and options First, select your desired washing program. Heavy (Light) Rapid (Light) Program Gentle (Light) Soak (Light) Program Normal (Light) Second, select the water level based on a High, Medium or Low load size.
Page 23
SET UP & USE RINSE & SPIN CYCLE GUIDE Load Size Soak Wash Final Rinse Total Program time Time Spin Times Time Default Scope (approx.) (approx.) Time – 12 min 5 min 31 min Normal Large – 12 min 5 min 31 min –...
CARE AND CLEANING CLEANING AND MAINTENANCE Cleaning the exterior Turn off the water faucets after finishing the day’s washing. This will shut off the water supply to your washer and prevent the unlikely possibility of damage from escaping water. Leave the lid open to allow the inside of your washer to dry out. Use a soft cloth to wipe up all detergent, bleach or other pills as they occur.
TROUBLESHOOTING & WARRANTY BEFORE YOU CALL FOR SERVICE IF THE UNIT FAILS TO OPERATE: A) Check to make sure that the unit is plugged in securely. If it is not, remove the plug from the outlet, wait 10 seconds and plug it in again securely. B) Check for a blown circuit fuse or a tripped main circuit breaker.
TROUBLESHOOTING & WARRANTY TROUBLESHOOTING Troubleshoot your problem by using the chart below. If the unit still does not work properly, contact W Appliance Co. customer service center or the nearest authorized service center. Customer must never troubleshoot internal components. SYMPTOMS POSSIBLE CAUSE SOLUTIONS Thumping...
Page 27
TROUBLESHOOTING & WARRANTY SYMPTOMS POSSIBLE CAUSE SOLUTIONS Excessive Too much detergent or HE detergents are formulated sudsing incorrect detergent. specifically for High-Efficiency washers and contain suds reducing agents. Only use detergent with the High-Efficiency (HE) logo. Water leaking Inlet hose connection Check hoses for leaks, cracks and is loose at faucet or splits.
Page 28
TROUBLESHOOTING & WARRANTY SYMPTOMS POSSIBLE CAUSE SOLUTIONS Staining Washer was not Always remove items from the unloaded promptly. washer as soon as possible after the cycle is complete. Always wash dark Clothes were not colors separately from light colors properly sorted. and whites to prevent discoloration.
Page 29
TROUBLESHOOTING & WARRANTY SYMPTOMS POSSIBLE CAUSE SOLUTIONS Water leaks Over sudsing of Over sudsing may create leaks, and detergent. may be caused by the type and amount of detergent used. High- Efficiency detergent is the only detergent recommended. Make sure that detergent and any additives are put into the correct dispenser compartments.
Page 30
TROUBLESHOOTING & WARRANTY SYMPTOMS POSSIBLE CAUSE SOLUTIONS Washer will not Water supply is turned This is normal. Press the POWER operate off . Control panel has button to turn the washer on. powered off due to Make sure cord is plugged securely inactivity.
Page 31
TROUBLESHOOTING & WARRANTY SYMPTOMS POSSIBLE CAUSE SOLUTIONS Washer not Filter clogged. Disassemble the water inlet hose and filling properly clean the inlet point. Check that inlet Inlet hoses may be hoses are not kinked or clogged. kinked Insufficient water supply. Make sure that both hot and cold water faucets are turned on all the The washer lid is open.
Page 32
TROUBLESHOOTING & WARRANTY ERROR CODE POSSIBLE CAUSE SOLUTIONS It takes over 30 minutes Check for washer not filling to fill water but cannot properly and water leakage. achieve its preset water level. The top lid is open. Close the lid. The washer runs out of Redistribute the load.
TROUBLESHOOTING & WARRANTY FABRIC CARE CHART The following symbols provide garment care direction. The Clothing care labels include symbols for washing, bleaching, drying and ironing, or dry cleaning when necessary. The use of symbols ensures consistency among garment manufacturers of domestic and imported items. Follow care label directions to maximize garment life and reduce laundering problems.
LIMITED WARRANTY Any repair, replacement, or warranty service, REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF and all questions about this product should be THE CUSTOMER; W Appliance Co. SHALL NOT BE directed to W Appliance Co. at 844-299-0879 LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL from the USA or Puerto Rico.
Page 36
BLACK & DECKER, BLACK+DECKER, the BLACK & DECKER and BLACK+DECKER logos and product names and the orange and black color scheme are trademarks of The Black & Decker Corporation, used under license. All rights reserved. Product in this box may differ slightly from that pictured. Does not affect function.
Need help?
Do you have a question about the BPWM09W and is the answer not in the manual?
Questions and answers
Need to replace the drain hose of black and decker 0.9 ****. Ft portable washing machine. Where I can get it as soon as possible